NVIDIA Jetson Xavier - Performance Tuning by Tuning Power

NVIDIA®Jetson Xavier™
Introduction
SoM Overview Carrier Boards NVIDIA Xavier Developer Kit Connect Tech Rogue Connect Tech Mimic Software Support NVIDIA JetPack
JetPack 5.X
Getting Started Installing JetPack Flashing the board with GUI installer JetPack Components Compiling Source Code Flashing the Board from Cmdline Performance Tuning Evaluating Performance Set Values Manually Tuning Power Maximizing Performance
Development in the Board
Getting into the Board Using Serial Console Using SSH Using Ubuntu Login Installing Packages
Video Capture and Display
Description Supported Cameras Imx219 Driver Software Support Using GStreamer Using Libargus
Processors
HD Audio and Video Subystem Video Encoder Video Decoder JPEG Encoder and Decoder Video Image Compositor Audio Processing Engine Deep Learning Accelerator Volta GPU Description Using CUDA Using OpenGL
Interfaces
I2C SD/eMMC Controller USB Controller
GStreamer Pipelines
Capture and Display H264 H265 VP9 MPEG4 Simultaneous Streams Compositor
Deep Learning
TensorRT Using TensorRT integrated with Tensorflow Parsing a Tensorflow model for TensorRT Parsing Caffe model for TensorRT Building TensorRT API examples Deep Learning Accelerator Software Support Deep Learning Tutorials Jetson Inference Jetson Reinforcement
RidgeRun Products
GstPTZR GstCUDA GstColorTransfer GstWebRTC GstRtspSink GstInterpipe GstInference GStreamer Daemon GstShark
Reference Documentation
Contact Us

Max-Q and Max-P Power Efficiency

It supports three different power modes such as 10W, 15W, and 30W. For each mode, several configurations with various CPU and GPU frequencies, and a number of cores online are possible.

Mode ID	0	1	2	3	4	5	6
Power Budget	EDP	10W	15W	30W	30W	30W	30W
Online CPU	8	2	4	8	6	4	2
CPU Max Frequency (MHz)	2265.6	1200	1200	1200	1450	1780	2100
GPU Max Frecuency (MHz)	1377	520	670	900	900	900	900
DLA Max Frequency (MHz)	1395.2	550	750	1050	1050	1050	1050
PVA Cores	2	0	1	1	1	1	1
PVA Max Frequency (MHz)	1088	0	550	760	760	760	760
Max Frequency	2133	1066	1333	1600	1600	1600	1600

The default mode is id 2. EDP represents the limits and therefore has no power budget

A utility is provided to change the board operations between these modes. In order to change the current operation mode using the command:

ID=5
sudo /usr/sbin/nvpmodel -m $ID

The mode persists across power cycles and won't change unless nvpmodel is called again.

In order to find the current mode use:

sudo /usr/sbin/nvpmodel -q

Extra Definitions can be added in a file located in:

/etc/nvpmodel/nvpmodel_t194.conf