NVIDIA Jetson Xavier - Connect Tech Rogue Carrier Board

NVIDIA®Jetson Xavier™
Introduction
SoM Overview Carrier Boards NVIDIA Xavier Developer Kit Connect Tech Rogue Connect Tech Mimic Software Support NVIDIA JetPack
JetPack 5.X
Getting Started Installing JetPack Flashing the board with GUI installer JetPack Components Compiling Source Code Flashing the Board from Cmdline Performance Tuning Evaluating Performance Set Values Manually Tuning Power Maximizing Performance
Development in the Board
Getting into the Board Using Serial Console Using SSH Using Ubuntu Login Installing Packages
Video Capture and Display
Description Supported Cameras Imx219 Driver Software Support Using GStreamer Using Libargus
Processors
HD Audio and Video Subystem Video Encoder Video Decoder JPEG Encoder and Decoder Video Image Compositor Audio Processing Engine Deep Learning Accelerator Volta GPU Description Using CUDA Using OpenGL
Interfaces
I2C SD/eMMC Controller USB Controller
GStreamer Pipelines
Capture and Display H264 H265 VP9 MPEG4 Simultaneous Streams Compositor
Deep Learning
TensorRT Using TensorRT integrated with Tensorflow Parsing a Tensorflow model for TensorRT Parsing Caffe model for TensorRT Building TensorRT API examples Deep Learning Accelerator Software Support Deep Learning Tutorials Jetson Inference Jetson Reinforcement
RidgeRun Products
GstPTZR GstCUDA GstColorTransfer GstWebRTC GstRtspSink GstInterpipe GstInference GStreamer Daemon GstShark
Reference Documentation
Contact Us

Description

Connect Tech’s Rogue is a full-featured Carrier Board for the Jetson Xavier. It is specifically designed for commercially deployable platforms and has an extremely small footprint of 92 x 105mm. It exposes similar interfaces than the developer kit but adds 3x USB 3.1, 2x GbE, 2x HDMI, and a locking Mini-Fit Jr. power input connector. Rugged camera add-on expansion boards will also be available for use with the Rogue to interface directly with the Xavier high-density MIPI CSI interfaces.

Top view of Connect Tech’s Rogue [1]

Specifications

• 2x Gigabit Ethernet
• 2x HDMI (Type-A)
• Can interface with high-density camera connector breakout in any of the following configurations:
  • 6 x2 Lane MIPI CSI-2
  • 4 x4 Lane MIPI CSI-2
• 1x USB OTG (Micro-AB)
• 3x USB 3.1 (Type-C)
• 1x Micro SD/UFS Card Slot
• 2x NVMe M.2 Key M Slots
• 2x UART
• 1x I2C
• 1x SPI
• 2x CAN
• 4 bit level shifted GPIO
• 1 x M.2 Key E Slot
• Wide power Input 9-19V DC
• Power, Reset and Recovery buttons
• 3-pin Picoblade connector fo RTC battery
• footprint: 92mm x 105mm

Where to get

You can get this board from the Rogue Product Page