NVIDIA Jetson Xavier - Getting in Board using Ubuntu Login

NVIDIA®Jetson Xavier™
Introduction
SoM Overview Carrier Boards NVIDIA Xavier Developer Kit Connect Tech Rogue Connect Tech Mimic Software Support NVIDIA JetPack
JetPack 5.X
Getting Started Installing JetPack Flashing the board with GUI installer JetPack Components Compiling Source Code Flashing the Board from Cmdline Performance Tuning Evaluating Performance Set Values Manually Tuning Power Maximizing Performance
Development in the Board
Getting into the Board Using Serial Console Using SSH Using Ubuntu Login Installing Packages
Video Capture and Display
Description Supported Cameras Imx219 Driver Software Support Using GStreamer Using Libargus
Processors
HD Audio and Video Subystem Video Encoder Video Decoder JPEG Encoder and Decoder Video Image Compositor Audio Processing Engine Deep Learning Accelerator Volta GPU Description Using CUDA Using OpenGL
Interfaces
I2C SD/eMMC Controller USB Controller
GStreamer Pipelines
Capture and Display H264 H265 VP9 MPEG4 Simultaneous Streams Compositor
Deep Learning
TensorRT Using TensorRT integrated with Tensorflow Parsing a Tensorflow model for TensorRT Parsing Caffe model for TensorRT Building TensorRT API examples Deep Learning Accelerator Software Support Deep Learning Tutorials Jetson Inference Jetson Reinforcement
RidgeRun Products
GstPTZR GstCUDA GstColorTransfer GstWebRTC GstRtspSink GstInterpipe GstInference GStreamer Daemon GstShark
Reference Documentation
Contact Us

Physical configuration

To prepare your Jetson AGX Xavier Developer Kit for use, connect it as follows:

• Connect an external HDMI display to the carrier board’s HDMI port. HDMI cable is not provided with the developer kit.
• Connect a USB keyboard and mouse.
  • For USB Type-A peripherals, NVIDIA provides a USB to USB-C adapter with the developer kit. You can also connect USB Type-A peripherals to the eStata+USB connector.
  • For USB Type-C peripherals, you can connect them to any of the 2 USB-C ports.
  • Leave the front USB Type-C port (the one next to the power light) available until you finish flashing the board.
• Connect the developer kit to your local network via Ethernet cable to the carrier board's Ethernet port.
• Connect the included AC adapter to the carrier board's power jack. Plug the AC adapter into an appropriately rated electrical outlet.
  • Use only the supplied AC adapter, as it is appropriately rated for your device.

Note that the Jetson AGX Xavier Developer Kit may be run upside down or resting on the non-vented side, allowing easy access to the camera connector and headers on the bottom of the carrier board. Any of these orientations are OK.

NVIDIA Jetson Xavier developer kit supported orientations

Logging in using Ubuntu GUI

After all, the physical configuration is done following these steps:

1. Turn on the board
2. You should log in automatically using NVIDIA user. If you don't log in automatically use user:nvidia password:nvidia or user:ubuntu password:ubuntu
3. Use the Xavier as any other Ubuntu machine