NVIDIA Jetson AGX Thor - NVIDIA developer kit

NVIDIA Jetson AGX Thor/Head

Follow Us On

Share This Page

Facebook Twitter LinkedIn WhatsApp Email Copy Link

Close

NVIDIA®Jetson AGX Thor™
Introduction
SoM Overview Carrier Boards NVIDIA developer kit Auvidea X241 Connect Tech Gauntlet
JetPack 7.0
Getting Started Installing JetPack Flashing the board with GUI installer JetPack Components Compiling Kernel and DTB Flashing the Board from Cmdline Flashing Filesystem Flashing the Board from USB Performance Tuning Evaluating Performance Set Values Manually Tuning Power Maximizing Performance
Development in the Board
Getting into the Board Using Serial Console Using SSH Using Ubuntu Login Installing Packages
Camera Support
Camera Over Ethernet (CoE) MIPI CSI IMX477+J20 Driver
Blackwell GPU
GStreamer Pipelines
Capture and Display H264 H265
Holoscan
PVA
RidgeRun Products
GstCUDA GstRtspSink GstStitcher GstNvStabilize GstBEV GstQtOverlay GstRrBrowserSink RidgeRun Development Suite Spherical Video PTZ
RidgeRun Open Source Projects
GstPerf GStreamer Daemon GstInterpipe GstShark
RidgeRun Reference Designs
Panoramic Stitching and WebRTC Streaming
Reference Documentation
Contact Us

Power and performance are key in embedded systems. In this section, you will learn how to configure and evaluate the performance and power consumption of the AGX Thor to meet your project requirements. This section is divided as follows:

• Evaluating Performance will show you how to use the tegrastats utility and how to interpret its output.
• Set Values Manually will show you how to control the frequency for the CPU, GPU, and memory.
• Tuning Power will show you how to use the nvpmodel utility to select between different power budgets.
• Maximizing Performance will show you how to activate all CPUs and how to use the jetson_clocks utility to set CPU, GPU, and memory to their maximum frequency.