Overview

Gauntlet Carrier Board delivers industrial-grade performance, ultra-fast networking, and advanced sensor integration—engineered to accelerate the next generation of physical AI, robotics, autonomy, and AI at the edge.
With a comprehensive suite of interfaces and expansion options, Gauntlet unlocks the performance of NVIDIA’s Blackwell GPU.
Is fully compatible with Connect Tech’s vision-ready platforms, enabling developers to quickly deploy full-stack AI systems with diverse imaging requirements.

Commercially deployable NVIDIA® Jetson Thor™ solution
Fully compatible with Connect Tech Vision Platforms for GMSL3, GMSL2, FPD-Link III, SDI, HDMI, and MIPI CSI-2
2x 10GbE, 2x 1GbE (RJ-45)
2x NVMe M.2 Key M Slots
2x USB 3.2

Table 1: Connect Tech's Gauntlet Carrier Board Specification
Feature	Description
Display output	1x Display Port
Networking	2x 10GBASE-T (10G Ethernet) 2x 1000BASE-T (1G Ethernet)
Camera Inputs	1x 16-Lane MIPI Expansion Connector Interface directly to a range of GMSL3, GMSL2, FPD-Link III, SDI, and MIPI CSI-2 image sensors.
USB	1x USB 3.2 Ports (Type-C – OTG Capable), 1x USB 3.2 Ports (Type-C)
Storage	2x M.2 Key M 2280 NVMe (1x 4 Lane PCIe Gen3, 1x 2 Lane PCIe Gen 3)
UART	2x @ 3.3V levels UART 2x RS232/422/485
I2C/SPI	2x I2C Channel @ 3.3V IO 2x SPI Channel @ 3.3V IO
GPIO	4x 3.3V GPI Inputs 6x 3.3V GPO Outputs (2x PWM Capable) 1x 3.3V Power Pin at 1A
User Expansion	1x M.2 Key E 2230 Wifi/BT (PCIe/USB2) 1x M.2 Key B 3042/3052 (LTE/5G – USB3) with Nano SIM
Input Power	+30V to +60V DC Wide Input Power (6-Pin Mini-Fit Jr. Connector)
PCB/Electronics Mechanical Information	Dimensions: 155mm x 126mm (6.10” x 4.96”)
Operating Temperature	-40°C to +85°C (-40°F to +185°F)

You can get this board from the Product Page

Previous: Introduction/Carrier_Boards/Auvidea_X241

Index

Next: JetPack_7.0

❯

Connect Tech Gauntlet carrier board support

Share This Page

Overview