Xavier/JetPack 5.0.2/Compiling Code: Difference between revisions
< Xavier | JetPack 5.0.2
No edit summary |
No edit summary |
||
Line 6: | Line 6: | ||
--> | --> | ||
This wiki will guide you through the process of building the kernel for the NVIDIA Jetson Xavier. The process is divided in | This wiki will guide you through the process of building the kernel for the NVIDIA Jetson Xavier. The process is divided in three different steps: | ||
# Install the toolchain (set of tools required to build the kernel) | # [[Xavier/JetPack_4.1/Compiling_Code/Toolchain | Install the toolchain ]] (set of tools required to build the kernel) | ||
# Build the actual kernel | # [[Xavier/JetPack_4.1/Compiling_Code/Kernel | Build the actual kernel]] | ||
# [[Xavier/JetPack_4.1/Compiling_Code/Bootloader | Build the bootloader]] | |||
These steps were tested in a fresh installation of Ubuntu 16.04. | |||
= Dependencies = | = Dependencies = |
Revision as of 20:49, 24 October 2018
This wiki will guide you through the process of building the kernel for the NVIDIA Jetson Xavier. The process is divided in three different steps:
- Install the toolchain (set of tools required to build the kernel)
- Build the actual kernel
- Build the bootloader
These steps were tested in a fresh installation of Ubuntu 16.04.
Dependencies
Make sure the following dependencies are installed on your system:
- wget
- lbzip2
- build-essential
- bc
- zip
- libgmp-dev
- libmpfr-dev
- libmpc-dev
- vim-common # For xxd
In Debian based systems you can run the following:
sudo apt install wget lbzip2 build-essential bc zip libgmp-dev libmpfr-dev libmpc-dev vim-common