Thundercomm TurboX C8550 - Getting into the Board

From RidgeRun Developer Wiki
< Thundercomm TurboX C8550‎ | Development in the Board
Revision as of 18:19, 10 December 2024 by Spalli (talk | contribs) (Created page with "<noinclude> {{Thundercomm TurboX C8550/Head|previous=Development in the Board|next=Development in the Board/Getting into the Board/Using adb|description=}} </noinclude> __TOC__ {{DISPLAYTITLE:Thundercomm TurboX C8550 - Getting into the Board|noerror}} The Thundercomm TurboX C8550 can be accessed via the microUSB cable with UART, via USB-C cable with adb and with SSH via ethernet cable. The steps for each method are explained in the links below: <br> * The Thundercomm...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


⇐ Index ⇒


Thundercomm TurboX C8550
Introduction
SoM Overview
Why the TurboX C8550?
Carrier Boards
Software Development Support
Boot Devices
Thundercomm SDK
Special / Debug Modes
Development in the Board
Getting into the Board
Device Setup
Intelligent SDK
QIM SDK
TFLite SDK
GStreamer Pipelines
Contact Us




The Thundercomm TurboX C8550 can be accessed via the microUSB cable with UART, via USB-C cable with adb and with SSH via ethernet cable. The steps for each method are explained in the links below:

  • The Using ADB section explains how to access the board with ADB.
  • The Using Serial Console section explains how to access the board with UART.
  • The Using SSH section explains how to access the board with SSH.


⇐ Index ⇒



Retrieved from "https://developer.ridgerun.com/wiki/index.php?title=Thundercomm_TurboX_C8550/Development_in_the_Board/Getting_into_the_Board&oldid=62969"