Thundercomm TurboX C8550 - Development in the Board

From RidgeRun Developer Wiki
< Thundercomm TurboX C8550
Revision as of 18:19, 10 December 2024 by Spalli (talk | contribs) (Created page with "<noinclude> {{Thundercomm TurboX C8550/Head|previous=Software_Support/Debug_modes/Set_up_Fastboot_Mode|next=Development in the Board/Getting into the Board|description=}} </noinclude> __TOC__ {{DISPLAYTITLE:Thundercomm TurboX C8550 - Development in the Board|noerror}} This section will help you to start on the process of developing on the board once it has been flashed with an image. You will be guided on how to get into the board and how to setup initial device configu...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


⇐ Index ⇒


Thundercomm TurboX C8550
Introduction
SoM Overview
Why the TurboX C8550?
Carrier Boards
Software Development Support
Boot Devices
Thundercomm SDK
Special / Debug Modes
Development in the Board
Getting into the Board
Device Setup
Intelligent SDK
QIM SDK
TFLite SDK
GStreamer Pipelines
Contact Us




This section will help you to start on the process of developing on the board once it has been flashed with an image. You will be guided on how to get into the board and how to setup initial device configurations:

  • The Getting into the Board section explains three ways to access the board.
  • The Device Setup section explains some initial configurations to ease your development process in the board.



⇐ Index ⇒



Retrieved from "https://developer.ridgerun.com/wiki/index.php?title=Thundercomm_TurboX_C8550/Development_in_the_Board&oldid=62968"