NVIDIA Jetson Orin/Introduction/Carrier Boards: Difference between revisions

From RidgeRun Developer Wiki
No edit summary
No edit summary
Line 6: Line 6:
{{DISPLAYTITLE:NVIDIA Jetson Orin - <descriptive page name>|noerror}}
{{DISPLAYTITLE:NVIDIA Jetson Orin - <descriptive page name>|noerror}}
-->
-->
In this section, you are going to learn about the carrier boards currently available for the Orin SoM. Currently, there are three carrier boards designed for the Orin AGX:


In this section, you are going to learn about the carrier boards currently available for the Orin SoM. The carrier board is the piece of hardware that offers the physical interfaces to use the Orin, the Orin SoM is connected to the carrier board using its 699-pin connector. Many customers start evaluating the Orin SoM using the developer kit offered by NVIDIA, and then once they have determined that this SoM meets their project requirements they proceed to design their custom carrier board or choose one of the carrier boards available in the market. Currently, there are two carrier boards designed for the Orin AGX: NVIDIA's Developer Kit and Connect Tech's Forge.
==NVIDIA Developer Kit==
Figure 1 shows the NVIDIA's developer kit for the Orin:
[File:NVIDIA_Jetson_Orin_AGX_devkit.png|650px|thumb|Figure 1: NVIDIA Jetson Orin AGX developer kit|link=]
<!--
*[[NVIDIA Jetson Orin/Introduction/Carrier_Boards/Nvidia_developer_kit| NVIDIA Orin developer kit]] is the carrier board sold by NVIDIA as the Orin developer kit.
*[[NVIDIA Jetson Orin/Introduction/Carrier_Boards/Nvidia_developer_kit| NVIDIA Orin developer kit]] is the carrier board sold by NVIDIA as the Orin developer kit.
*[[NVIDIA Jetson Orin/Introduction/Carrier_Boards/Connect_Tech_Rogue| Connect Tech’s Forge]] is a carrier with small footprint, designed for commercial deployment.
*[[NVIDIA Jetson Orin/Introduction/Carrier_Boards/Connect_Tech_Rogue| Connect Tech’s Forge]] is a carrier with small footprint, designed for commercial deployment.
-->


<noinclude>
<noinclude>
{{NVIDIA Jetson Orin/Foot|Introduction/SoM Overview|Introduction/Carrier Boards/Nvidia developer kit}}
{{NVIDIA Jetson Orin/Foot|Introduction/SoM Overview|Introduction/Carrier Boards/Nvidia developer kit}}
</noinclude>
</noinclude>

Revision as of 16:37, 28 June 2022


Previous: Introduction/SoM Overview Index Next: Introduction/Carrier Boards/Nvidia developer kit





In this section, you are going to learn about the carrier boards currently available for the Orin SoM. The carrier board is the piece of hardware that offers the physical interfaces to use the Orin, the Orin SoM is connected to the carrier board using its 699-pin connector. Many customers start evaluating the Orin SoM using the developer kit offered by NVIDIA, and then once they have determined that this SoM meets their project requirements they proceed to design their custom carrier board or choose one of the carrier boards available in the market. Currently, there are two carrier boards designed for the Orin AGX: NVIDIA's Developer Kit and Connect Tech's Forge.

NVIDIA Developer Kit

Figure 1 shows the NVIDIA's developer kit for the Orin:

[File:NVIDIA_Jetson_Orin_AGX_devkit.png|650px|thumb|Figure 1: NVIDIA Jetson Orin AGX developer kit|link=]




Previous: Introduction/SoM Overview Index Next: Introduction/Carrier Boards/Nvidia developer kit