NVIDIA Jetson Orin - Developer Kit Ubuntu Login

From RidgeRun Developer Wiki


Previous: In Board/Getting in Board/SSH Index Next: In Board/Installing Packages









This section describes how to access using each of the different mechanisms.

Physical configuration To prepare your Jetson AGX Orin Developer Kit for use, connect it as follows:

  • Connect an external HDMI display to the carrier board’s DisplayPort output port. The cable is not provided with the developer kit.
  • Connect a USB keyboard and mouse.
    • For USB Type-A peripherals, NVIDIA provides a USB to USB-C adapter with the developer kit. You can also connect USB Type-A peripherals to the eStata+USB connector.
    • For USB Type-C peripherals, you can connect them to any of the 2 USB-C ports.
  • Connect the developer kit to your local network via the Ethernet cable to the carrier board's Ethernet port.
  • Connect the included AC adapter to the carrier board's power jack. Plug the AC adapter into an appropriately rated electrical outlet.
    • Use only the supplied AC adapter, as it is appropriately rated for your device.

Logging in using Ubuntu GUI

After all, the physical configuration is done following these steps:

  1. Turn on the board.
  2. You should log in automatically using NVIDIA user. If you don't log in automatically use:
user:nvidia
password:nvidia

or

user:ubuntu 
password:ubuntu



Previous: In Board/Getting in Board/SSH Index Next: In Board/Installing Packages