NVIDIA Jetson Orin/Introduction/Carrier Boards/Auvidea X230D: Difference between revisions
No edit summary |
No edit summary |
||
Line 6: | Line 6: | ||
--> | --> | ||
Auvidea's X230D is meant to address the need to easily migrate from developments based on the AGX Xavier (X221) to the new AGX Orin by fully supporting integration with NVIDIA's SDK. | |||
The X230D delivers industry standard CSI-2 connectors to interface with: | |||
* RPi-camera modules | |||
* ArduCam, Vision Components, Framos, Basler, Allied Vision image sensors | |||
* FPD-Link III | |||
[[File:Connect Tech Rogue Orin.jpg|thumb| center | 600px | Figure 1: Top view of [https://connecttech.com/product/forge-carrier-for-nvidia-jetson-agx-orin/# Forge Carrier for NVIDIA® Jetson AGX Orin™]]] | [[File:Connect Tech Rogue Orin.jpg|thumb| center | 600px | Figure 1: Top view of [https://connecttech.com/product/forge-carrier-for-nvidia-jetson-agx-orin/# Forge Carrier for NVIDIA® Jetson AGX Orin™]]] |
Revision as of 13:27, 1 August 2022
Auvidea's X230D is meant to address the need to easily migrate from developments based on the AGX Xavier (X221) to the new AGX Orin by fully supporting integration with NVIDIA's SDK.
The X230D delivers industry standard CSI-2 connectors to interface with:
- RPi-camera modules
- ArduCam, Vision Components, Framos, Basler, Allied Vision image sensors
- FPD-Link III
Feature | Description |
---|---|
Networking |
|
Camera Inputs | 1x DisplayPort |
Display |
|
USB | 1x USB 3.2 Ports (Type-C – OTG Capable), 1x USB 3.2 Ports (Type-C) |
Storage | 1 x Micro SD/UFS Card Slot, 2x NVMe M.2 Key M Slot |
UART |
|
I2C/SPI |
|
GPIO | 4x GPI, 4x GPO |
User Expansion |
|
Input Power | +10 to 36V DC Wide Input Power
(6-pin Mini-fit Jr. Connector) |
Buttons | Power, Reset, Recovery
(Tactile Buttons as well as fine pitch pin header connector) |
RTC Battery | 3-pin Picoblade connector to accept CTI battery cable assembly |
PCB/Electronics Mechanical Information | Dimensions: 155mm x 125mm |
Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
You can get this board from the Forge Product Page