NVIDIA Jetson Orin/Introduction/Carrier Boards

NVIDIA®Jetson AGX Orin™
Introduction
SoM Overview Carrier Boards NVIDIA developer kit Auvidea X230D Connect Tech Forge Software Development Support
JetPack 5.0.2
Getting Started Installing JetPack Flashing the board with GUI installer JetPack Components Compiling Source Code Flashing the Board from Cmdline Performance Tuning Evaluating Performance Set Values Manually Tuning Power Maximizing Performance Software Encoders For Jetson Orin Nano
Development in the Board
Getting into the Board Using Serial Console Using SSH Using Ubuntu Login Installing Packages
Emulation
Flashing commands for emulation
Supported Cameras
IMX477+J20 Driver
GStreamer Pipelines
Capture and Display H264 H265
RidgeRun Products
GstPTZR GstCUDA GstColorTransfer GstWebRTC GstRtspSink GstInterpipe GstInference GstVPI GStreamer Daemon GstShark
RidgeRun Reference Designs
Panoramic Stitching and WebRTC Streaming
Reference Documentation
Contact Us

In this section, you are going to learn about the carrier boards currently available for the Orin SoM. The carrier board is the piece of hardware that offers the physical interfaces to use the Orin, the Orin SoM is connected to the carrier board using its 699-pin connector. Many customers start evaluating the Orin SoM using the developer kit offered by NVIDIA, and then once they have determined that this SoM meets their project requirements they proceed to design their custom carrier board or choose one of the carrier boards available in the market. Currently, there are two carrier boards designed for the Orin AGX: NVIDIA's Developer Kit and Connect Tech's Forge.

NVIDIA Developer Kit

Figure 1 shows the NVIDIA's developer kit for the Orin:

Figure 1: NVIDIA Jetson Orin AGX developer kit