NVIDIA Jetson Orin - JetPack 5.0.2 - Performance Tuning

NVIDIA®Jetson AGX Orin™
Introduction
SoM Overview Carrier Boards NVIDIA developer kit Auvidea X230D Connect Tech Forge Software Development Support
JetPack 5.0.2
Getting Started Installing JetPack Flashing the board with GUI installer JetPack Components Compiling Source Code Flashing the Board from Cmdline Performance Tuning Evaluating Performance Set Values Manually Tuning Power Maximizing Performance Software Encoders For Jetson Orin Nano
Development in the Board
Getting into the Board Using Serial Console Using SSH Using Ubuntu Login Installing Packages
Emulation
Flashing commands for emulation
Supported Cameras
IMX477+J20 Driver
GStreamer Pipelines
Capture and Display H264 H265
RidgeRun Products
GstPTZR GstCUDA GstColorTransfer GstWebRTC GstRtspSink GstInterpipe GstInference GstVPI GStreamer Daemon GstShark
RidgeRun Reference Designs
Panoramic Stitching and WebRTC Streaming
Reference Documentation
Contact Us

In this section, you will learn how to configure and evaluate performance and power consumption on the Orin. This section is divided in:

• Evaluating performance will show you how to use the tegrastats utility and how to interpret its output.
• Setting values manually will show you how to control the frequency for the CPU, GPU, and memory.
• Tunning power will show you how to use the nvpmodel utility to select between different power budgets.
• Maximizing performance will show you how to activate all CPUs and how to use the jetson_clocks utility to set CPU, GPU, and memory to their maximum frequency.