NVIDIA Jetson Orin - JetPack 5.0.2 - Getting Started
Before using the developer kit you must install JetPack. A Linux host computer with the following minimum system requirements is needed to complete the installation:
- Ubuntu Linux x64 16.04, 18.04, or 20.04.
- Internet connection
- At least 23GB of disk space
See Installing Jetpack for a detailed JetPack installation guide.
Physical configuration
To prepare your Jetson AGX Orin Developer Kit for use, connect it as follows:
- Connect an external HDMI display to the carrier board’s HDMI port. HDMI cable is not provided with the developer kit.
- Connect a USB keyboard and mouse.
- For USB Type-A peripherals, NVIDIA provides a USB to USB-C adapter with the developer kit. You can also connect USB Type-A peripherals to the eStata+USB connector.
- For USB Type-C peripherals, you can connect them to any of the 2 USB-C ports.
- Leave the front USB Type-C port (the one next to the power light) available until you finish flashing the board.
- Connect the developer kit to your local network via Ethernet cable to the carrier board's Ethernet port.
- Connect the included AC adapter to the carrier board's power jack. Plug the AC adapter into an appropriately rated electrical outlet.
- Use only the supplied AC adapter, as it is appropriately rated for your device.