NVIDIA Jetson Orin/JetPack 5.0.2/Getting Started: Difference between revisions

Revision as of 00:32, 30 June 2022

In order to customize the OS components for your Jetson board, it is necessary to Before using the developer kit you must install JetPack. A Linux host computer with the following minimum system requirements is needed to complete the installation:

Ubuntu Linux x64 16.04, 18.04, or 20.04.
Internet connection
At least 23GB of disk space

See Installing Jetpack for a detailed JetPack installation guide.

Previous: JetPack 5.0

Index

Next: JetPack 5.0/Getting Started/Installing Jetpack

@@ Line 3: / Line 3: @@
 </noinclude>
+In order to customize the OS components for your Jetson board, it is necessary to
 Before using the developer kit you must install JetPack. A Linux host computer with the following minimum system requirements is needed to complete the installation:
 *Ubuntu Linux x64 16.04, 18.04, or 20.04.
@@ Line 9: / Line 10: @@
 See [[NVIDIA Jetson Orin/JetPack_5.0/Getting_Started/Installing_Jetpack | Installing Jetpack]] for a detailed JetPack installation guide.
-== Physical configuration ==
-To prepare your Jetson AGX Orin Developer Kit for use, connect it as follows:
-*Connect an external HDMI display to the carrier board’s HDMI port. HDMI cable is not provided with the developer kit.
-*Connect a USB keyboard and mouse.
-**For USB Type-A peripherals, NVIDIA provides a USB to USB-C adapter with the developer kit. You can also connect USB Type-A peripherals to the eStata+USB connector.
-**For USB Type-C peripherals, you can connect them to any of the 2 USB-C ports.
-**Leave the front USB Type-C port (the one next to the power light) available until you finish flashing the board.
-*Connect the developer kit to your local network via Ethernet cable to the carrier board's Ethernet port.
-*Connect the included AC adapter to the carrier board's power jack. Plug the AC adapter into an appropriately rated electrical outlet.
-**Use only the supplied AC adapter, as it is appropriately rated for your device.
 <noinclude>
 {{NVIDIA Jetson Orin/Foot|JetPack 5.0|JetPack 5.0/Getting Started/Installing Jetpack}}
 </noinclude>