NVIDIA Jetson Orin/JetPack 5.0.2/Getting Started

NVIDIA®Jetson AGX Orin™
Introduction
SoM Overview Carrier Boards NVIDIA developer kit Auvidea X230D Connect Tech Forge Software Development Support
JetPack 5.0.2
Getting Started Installing JetPack Flashing the board with GUI installer JetPack Components Compiling Source Code Flashing the Board from Cmdline Performance Tuning Evaluating Performance Set Values Manually Tuning Power Maximizing Performance Software Encoders For Jetson Orin Nano
Development in the Board
Getting into the Board Using Serial Console Using SSH Using Ubuntu Login Installing Packages
Emulation
Flashing commands for emulation
Supported Cameras
IMX477+J20 Driver
GStreamer Pipelines
Capture and Display H264 H265
RidgeRun Products
GstPTZR GstCUDA GstColorTransfer GstWebRTC GstRtspSink GstInterpipe GstInference GstVPI GStreamer Daemon GstShark
RidgeRun Reference Designs
Panoramic Stitching and WebRTC Streaming
Reference Documentation
Contact Us

In this section, you will learn about the NVIDIA SDK manager and the system requirements to use it.

The NVIDIA SDK manager is the tool that allows setting up the development environment, including getting the JetPack SDK and optionally flashing the Orin AGX using its UI. The NVIDIA SDK manager runs on a host computer, not in the Orin AGX. The Host computer must have:

• Ubuntu Linux x64_64 16.04, 18.04 and 20.04 or CentOS/RHEL 7.6, 8.0 and 8.2 on x86_64 system.
• Internet connection.
• At least 23GB of disk space.
• 8GB of RAM.