NVIDIA Jetson Orin/JetPack 5.0.2/Getting Started: Difference between revisions

Revision as of 20:46, 27 April 2022

Before using the developer kit you must install JetPack. A Linux host computer with the following minimum system requirements is needed to complete the installation:

Ubuntu Linux x64 16.04, 18.04, or 20.04.
Internet connection
At least 23GB of disk space

See Installing Jetpack for a detailed JetPack installation guide.

Physical configuration

To prepare your Jetson AGX Orin Developer Kit for use, connect it as follows:

Connect an external HDMI display to the carrier board’s HDMI port. HDMI cable is not provided with the developer kit.
Connect a USB keyboard and mouse.
- For USB Type-A peripherals, NVIDIA provides a USB to USB-C adapter with the developer kit. You can also connect USB Type-A peripherals to the eStata+USB connector.
- For USB Type-C peripherals, you can connect them to any of the 2 USB-C ports.
- Leave the front USB Type-C port (the one next to the power light) available until you finish flashing the board.
Connect the developer kit to your local network via Ethernet cable to the carrier board's Ethernet port.
Connect the included AC adapter to the carrier board's power jack. Plug the AC adapter into an appropriately rated electrical outlet.
- Use only the supplied AC adapter, as it is appropriately rated for your device.

Previous: JetPack 5.0

Index

Next: JetPack 5.0/Getting Started/Installing Jetpack

@@ Line 1: / Line 1: @@
 <noinclude>
-{{NVIDIA Jetson Orin/Head|previous=JetPack 4.1|next=JetPack 4.1/Getting Started/Installing Jetpack|keywords=jetpack,configure,configuration}}
+{{NVIDIA Jetson Orin/Head|previous=JetPack 5.0|next=JetPack 5.0/Getting Started/Installing Jetpack|keywords=jetpack,configure,configuration}}
 </noinclude>
@@ Line 22: / Line 22: @@
 <noinclude>
-{{NVIDIA Jetson Orin/Foot|JetPack 4.1|JetPack 4.1/Getting Started/Installing Jetpack}}
+{{NVIDIA Jetson Orin/Foot|JetPack 5.0|JetPack 5.0/Getting Started/Installing Jetpack}}
 </noinclude>