GstWebRTC - GstWebRTCBin

GstWebRTC
WebRTC Fundamentals
GstWebRTC Basics
Signaling 1.Predefined Signaling 2.Custom Signaling 3.API Reference 4.Advance Settings Plugin Elements 1.GstWebRTCBin 2.GstWebRTCBin Properties 3.GstWebRTCBin Features 1.Data Channel
Evaluating GstWebRTC
Getting the code
Building GstWebRTC
x86 Platforms Jetson Platforms: TX1, TX2 and Xavier Yocto Platforms: i.MX6 and i.MX8
Examples
x86 OpenWebRTC PubNub AppRTC MediaSoup iMX6 OpenWebRTC PubNub AppRTC iMX8 OpenWebRTC PubNub AppRTC TX1/TX2/Xavier OpenWebRTC PubNub AppRTC
MCU Demo Application
Contact Us

This page gives an overview of the GstRrWebRTCBin element.

Architecture

Ridgerun's GstRrWebRTCBin can be used as a sender-receiver endpoint, as shown in Figure 1. If a pipeline uses GstRrWebRTCBin element, it becomes a send-receive endpoint. GstRrWebRTCBin may receive and send audio, video or both simultaneously.

Configurations

The supported capabilities are determined at runtime based on the pads that were requested for the elements. Simply said, if a GstRrWebRTCBin was created with video and audio pads, it will be capable of sending and receiving both medias. Table 1 summarizes the complete set of possible configurations. At the time being, only one pad of each media type can be created in direction.

Table 1. GstRrWebRTCBin Supported Capabilities

Send/Receive Audio Only		OpenWebRTC Example pipeline
Send/Receive Video Only		OpenWebRTC Example pipeline
Send/Receive Audio and Video		OpenWebRTC Example pipeline
Send Video - Receive Audio		OpenWebRTC Example pipeline
Send Audio - Receive Video		OpenWebRTC Example pipeline
Send Video and Audio - Receive Audio		OpenWebRTC Example pipeline
Send Video and Audio - Receive Video		OpenWebRTC Example pipeline
Send Audio - Receive Audio and Video		OpenWebRTC Example pipeline
Send Video - Receive Audio and Video		OpenWebRTC Example pipeline