i.MX8 - Nitrogen8M - Getting Started - Selecting Boot Options
The board is able to boot from more than one way, below you will see how to configure the boot device to boot from a USB device.
USB Boot
This Boot option requires a Bootable USB stick and a Serial Console Cable, refer to iMX8 Software Support section to download a prebuilt image or create your own image with the instructions provided in the Custom Image section.
Instructions to setting up the USB Boot:
- Connect the Nitrogen8m to a host machine with the Serial Console Cable.
- Start any serial console (i.e minicom or term)
- Power on the board, the console will display the U-boot start-up screen.
- Press any key on your keyboard to stop the boot sequence, this will display the U-Boot console.
- Change the Boot Device with the following command:
setenv boot_targets usb0
- If you do not want to repeat this commands, you can save the selected Boot Device with this command:
saveenv
- Continue the Boot sequence by typing the next command:
boot
After the previous instructions, the board will boot from the USB stick