IMX8/Nitrogen8M/Getting Started: Difference between revisions

Revision as of 06:44, 20 November 2018

On this section you are going to find all the information to start from scratch. You will find information about the board and how to configure your host machine in order to customize your own images.

Selecting Boot Mode section that provides hints on how to configure the multiple boot options for the board.
System Setup section that provides key steps to configure a development computer to start communicating / interacting with the board.
Software Support section that provides a summary of the several running software to use on the board.
Loading Pre-built Images section that provides the procedure to deploy pre-built software images on the board.

Previous: Nitrogen8M/Overview

Index

Next: Nitrogen8M/Getting Started/Selecting Boot Options

Revision as of 15:55, 12 November 2018 (view source) Gfallas (talk \| contribs) No edit summary ← Older edit		Revision as of 06:44, 20 November 2018 (view source) Spalli (talk \| contribs) mNo edit summary Newer edit →
Line 1:		Line 1:
	<noinclude>{{IMX8/Head}}</noinclude>		<noinclude>{{IMX8/Head\|carrier,carrier board,base board,SOM,System on Module,Boundary Devices,Nitrogen8M,configure,configure host machine }}</noinclude>

	On this section you are going to find all the information to start from scratch. You will find information about the board and how to configure your host machine in order to customize your own images.		On this section you are going to find all the information to start from scratch. You will find information about the board and how to configure your host machine in order to customize your own images.