IMX8/iMX8MEVK/Yocto: Difference between revisions

Revision as of 21:11, 9 November 2018

On this section you will find basic useful information on how to get started with the Yocto distribution recommended for your board. Additional information might be provided to speed up the whole development experience (installation hints, alternate / advanced boot methods, Yocto navigation among others).

Building Yocto section that provides the basic steps to clone and build Yocto for the corresponding board.
Installing an Image section that provides the steps to deploy the generated firmware images into a bootable device.

Previous: iMX8MEVK/Building Yocto

Index

Next: Building Yocto

Revision as of 20:30, 9 November 2018 (view source) Dchaverri (talk \| contribs) No edit summary ← Older edit		Revision as of 21:11, 9 November 2018 (view source) Dchaverri (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
	<noinclude>{{IMX8/Head}}</noinclude>		<noinclude>{{IMX8/Head}}</noinclude>

	On this section you ~~are going to find all the information to start from scratch. You~~ will find information ~~about the board and~~ how to ~~configure~~ your ~~host machine in order~~ to ~~customize your own images~~.		On this section you will find basic useful information on how to get started with the Yocto distribution recommended for your board. Additional information might be provided to speed up the whole development experience (installation hints, alternate / advanced boot methods, Yocto navigation among others).