IMX8/iMX8MEVK/Yocto/Installing an Image: Difference between revisions
No edit summary |
No edit summary |
||
Line 18: | Line 18: | ||
Each device has numbers at the end, those numbers are related to partitions and are not needed to install the image. | Each device has numbers at the end, those numbers are related to partitions and are not needed to install the image. | ||
As example, instead of /dev/'''sdb1''' use /dev/'''sdb'''. | As example, instead of /dev/'''sdb1''', use /dev/'''sdb'''. | ||
=Installing= | =Installing= |
Revision as of 19:18, 9 November 2018
In order to install an image, you must identify your device ID.
Check it as follows:
blkid -o list
Image
Each device has numbers at the end, those numbers are related to partitions and are not needed to install the image. As example, instead of /dev/sdb1, use /dev/sdb.
Installing
Yocto supports several image formats, as example ext4, img, sdcard and wic.
In old Yocto versions, the most common image type was sdcard, use dd with this image type.
sudo dd if=<image.sdcard> of=/dev/<device> bs=4M && sync
Recent Yocto versions have wic image type as default format, use bmaptool as follows:
sudo bmaptool copy <image.wic> /dev/<device> --nobmap