Revision as of 17:15, 28 September 2018

Getting Started

On this page you are going to find all the information to start from scratch. You will find information about the board and how to configure your host machine in order to customize your own images. First, a general description about the board capabilities will be shown. Next, a description about the package content and a briefly guide about how to start the board. Finally, the required steps to build a custom image will be shown.

Key Features

The iMX8M Evaluation Kit has the following features:

Processor: i.MX 8M Quad (Based on Cortex-A53 and Cortex-M4F series)
Memory RAM: 3 GB LPDDR4
eMMC: 16 GB
Wireless: WiFi 802.11 a/b/g/n/ac MIMO 2x2 + Bluetooth 4.1
Network: Gigabit Ethernet
GPU: Vivante GC7000 Lite
Display specification:

HDMI (4K@60fps)
4-lane MIPI-DSI mini-SAS (1080p@60fps)

Camera support:

2x 4-lane MIPI-CSI mini-SAS (1080p@60fps)

Audio: 3.5 mm Audio Jack
Interfaces:

USB 3.0 Type A
USB 3.0 Type C
SD card
RTC
M.2 connector (PCIe, USB, UART, I2C and I2S)
JTAG

Supported OS :

Yocto
FreeRTOS
Android

Power supply: 12V

Package Content

This is a description about the Nitrogen8m accessory kit and its contents. The packages includes the following items:

iMX8M Evaluation Kit Board preloaded with Android 8.1
12v power adapter
USB type A to micro USB
USB type A to USB type C

[[IMX8/<Replace with "previous" page>|Previous: <Replace with "previous" page>]]

Index

[[IMX8/<Replace with "next" page>|Next: <Replace with "next" page>]]

@@ Line 6: / Line 6: @@
 =Key Features=
-The iMX8EVK has the following features:
+The iMX8M Evaluation Kit has the following features:
 * Processor: i.MX 8M Quad (Based on Cortex-A53 and Cortex-M4F series)
 * Memory RAM: 3 GB LPDDR4
@@ Line 31: / Line 31: @@
 # Android
 * Power supply: 12V
 =Package Content=
 This is a description about the Nitrogen8m accessory kit and its contents. The packages includes the following items: