IMX8/Nitrogen8M/Getting Started/System Setup: Difference between revisions
No edit summary |
mNo edit summary |
||
(7 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
<!-- Please add custom keywords relevant to the page as arguments to the head macro. For example: | <!-- Please add custom keywords relevant to the page as arguments to the head macro. For example: | ||
{{IMX8/Head | {{IMX8/Head}} | ||
You may leave them unspecified if custom keywords don't apply. | You may leave them unspecified if custom keywords don't apply. | ||
--> | --> | ||
<noinclude>{{IMX8/Head}}</noinclude> | <noinclude>{{IMX8/Head|previous=Nitrogen8M/Getting Started/Selecting Boot Options|next=Nitrogen8M/Getting_Started/Software_Support|metakeywords=carrier,carrier board,base board,SOM,System on Module,Boundary Devices,Nitrogen8M,configure,configure host machine,serial console,serial communication,serial console}}</noinclude> | ||
{{DISPLAYTITLE:i.MX8 - Nitrogen8M System Setup |noerror}} | {{DISPLAYTITLE:i.MX8 - Nitrogen8M System Setup |noerror}} | ||
Line 10: | Line 9: | ||
== Setup serial console communication == | == Setup serial console communication == | ||
Follow the next instructions to establish | Follow the next instructions to establish serial communication with the board: | ||
1. Shipped with the | 1. Shipped with the Nitrogen8M is a console serial cable. Plug that serial cable to the Nitrogen8M J14 connector, labeled as "SERIAL". | ||
[[File:Nitrogen8M Serial Board.jpg| center | 400px|thumb|Serial cable attached to Nitrogen8M ]] | [[File:Nitrogen8M Serial Board.jpg| center | 400px|thumb|Serial cable attached to Nitrogen8M ]] | ||
2. On the other end, you will need to attach the serial cable connector labeled "CONSOLE" to a serial port or more likely to | 2. On the other end, you will need to attach the serial cable connector labeled "CONSOLE" to a serial port or more likely to a USB to serial converter. | ||
[[File: | [[File:Nitrogen8M_Serial_USB_Converter.jpg| center | 400px|thumb|Serial cable attached to USB to serial converter ]] | ||
[[File:Nitrogen8M_Serial.jpg | center | 400px|thumb|Serial cable connection]] | [[File:Nitrogen8M_Serial.jpg | center | 400px|thumb|Serial cable connection]] | ||
Line 30: | Line 29: | ||
<noinclude>{{IMX8/Foot| | <noinclude>{{IMX8/Foot|Nitrogen8M/Getting Started/Selecting Boot Options|Nitrogen8M/Getting_Started/Software_Support}}</noinclude> |
Latest revision as of 17:13, 9 March 2023
Setup serial console communication
Follow the next instructions to establish serial communication with the board:
1. Shipped with the Nitrogen8M is a console serial cable. Plug that serial cable to the Nitrogen8M J14 connector, labeled as "SERIAL".
2. On the other end, you will need to attach the serial cable connector labeled "CONSOLE" to a serial port or more likely to a USB to serial converter.
3. Then just attach the USB cable from the converter to your computer.
And you are ready with the required console physical connection. Now you can use your favorite terminal application to access the board. If you are not familiar with any terminal application, for Linux you can use minicom or picocom, please try one of the following instructions: