IMX8/Nitrogen8M/Getting Started: Difference between revisions

Latest revision as of 17:12, 9 March 2023

In this section, you are going to find all the information to start from scratch. You will find information about the board and how to configure your host machine in order to customize your own images.

Selecting Boot Mode section that provides hints on how to configure the multiple boot options for the board.
System Setup section that provides key steps to configure a development computer to start communicating/interacting with the board.
Software Support section that provides a summary of the several running software to use on the board.
Loading Pre-built Images section that provides the procedure to deploy pre-built software images on the board.

Previous: Nitrogen8M/Overview

Index

Next: Nitrogen8M/Getting Started/Selecting Boot Options

@@ Line 1: / Line 1: @@
-<noinclude>{{IMX8/Head}}</noinclude>
+<noinclude>{{IMX8/Head|previous=Nitrogen8M/Overview|next=Nitrogen8M/Getting Started/Selecting Boot Options|metakeywords=carrier,carrier board,base board,SOM,System on Module,Boundary Devices,Nitrogen8M,configure,configure host machine }}</noinclude>
-The Nitrogen8M's eMMc is preloaded with Android 8.1.
+In this section, you are going to find all the information to start from scratch. You will find information about the board and how to configure your host machine in order to customize your own images.
-The first time running the board requires the boot switch set to eMMc as boot device (should be placed to the battery holder side).
-Next, a HDMI cable should be plugged in the HDMI port.
-Finally, plug in the power cable to start the boot process.
-This board does not have a power button, after connecting the power cable, the board will start booting automatically.
+*[[IMX8/Nitrogen8M/Getting Started/Selecting Boot Options|Selecting Boot Mode]] section that provides hints on how to configure the multiple boot options for the board.
+*[[IMX8/Nitrogen8M/Getting Started/System Setup|System Setup]] section that provides key steps to configure a development computer to start communicating/interacting with the board.
+*[[IMX8/Nitrogen8M/Getting Started/Software Support|Software Support]] section that provides a summary of the several running software to use on the board.
+*[[IMX8/Nitrogen8M/Getting Started/Loading Pre-built Images|Loading Pre-built Images]] section that provides the procedure to deploy pre-built software images on the board.
 <noinclude>{{IMX8/Foot|Nitrogen8M/Overview|Nitrogen8M/Getting Started/Selecting Boot Options}}</noinclude>