IMX8/Nitrogen8M/Yocto/Advanced image loading: Difference between revisions
No edit summary |
|||
Line 173: | Line 173: | ||
You will need a NFS server, you can use the following instruction to set them up if you don't have if already. | You will need a NFS server, you can use the following instruction to set them up if you don't have if already. | ||
* [[Setting_Up_A_NFS_Service |Setup a NFS server]] | |||
Also you will need mkimage from u-boot tools package | Also you will need mkimage from u-boot tools package |
Revision as of 17:45, 21 November 2018
Network Boot
When you are developing or debugging on your kernel or a file system application, network boot can be handy to avoid multiple flashes and to load new application versions without having to reboot the board each time.
Network boot configuration will load the kernel and device tree from a TFTP server and the root file system will be shared from host PC over NFS.
Host Setup
You will need a TFTP server and a NFS server, you can use the following instruction to set them up if you don't have them already.
TFTP and NFS Configuration
For the following steps you should have a complete Yocto build for the Nitrogen8M as described at Building Yocto
1. Copy the kernel image and the kernel device tree blob from your Yocto build into the TFTP directory.
# You need to change TFTP_SERVER variable to match your TFTP directory TFTP_SERVER=/srv/tftp cd $YOCTO_BUILD_DIR/build/tmp/deploy/images/nitrogen8m cp Image $TFTP_SERVER cp imx8mq-nitrogen8m.dtb $TFTP_SERVER
2. Copy the file system directory to a location exported by the NFS server.
cp -r $YOCTO_BUILD_DIR/tmp/work/nitrogen8m/$IMAGE/1.0-r0/rootfs ~/$NFS_ROOTFS
Target Setup
Finally you need to configure the Nitrogen8M u-boot to boot from network, as follows:
1. Power ON the Nitrogen8M board, and stop the boot up process on u-boot, (press a key during the boot up count down)
2. While in u-boot set the following environment variables
# You need to set <server_ip_address> and <nfs_server_path> to match your host setup setenv tftpserverip <server_ip_address> setenv nfsroot <nfs_server_path> saveenv
Example:
# Nitrogen8m rootfs is at NFS_ROOTFS=/srv/nfs/nitrogen8m setenv tftpserverip 192.168.1.60 setenv nfsroot /srv/nfs/nitrogen8m saveenv
3. Boot the board from network (still in u-boot) with the following command
run netboot
This command should be run each time you restart the board to boot from network.
=> run netboot BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.1.78 (1067 ms) Using ethernet@30be0000 device TFTP from server 192.168.1.60; our IP address is 192.168.1.78 Filename 'Image'. Load address: 0x40480000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###################### 3.1 MiB/s done Bytes transferred = 21408256 (146aa00 hex) BOOTP broadcast 1 DHCP client bound to address 192.168.1.78 (3 ms) Using ethernet@30be0000 device TFTP from server 192.168.1.60; our IP address is 192.168.1.78 Filename 'imx8mq-nitrogen8m.dtb'. Load address: 0x43000000 Loading: ########## 2.9 MiB/s done Bytes transferred = 47956 (bb54 hex) ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Using Device Tree in place at 0000000043000000, end 000000004300eb53 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0
Network File System (NFS)
When you are development for the file system (don't need to modify the kernel), you may want a network file system to change your applications without having to flash and reboot the board each time, just change the files on your host PC. Following the next instructions you will have a root file system shared from host PC over NFS.
Host Setup
You will need a NFS server, you can use the following instruction to set them up if you don't have if already.
Also you will need mkimage from u-boot tools package
sudo apt-get install u-boot-tools
Modifying Bootscript
Boundary U-Boot is made to look for and execute a boot script file named boot.scr. This script will load kernel, device tree, setup the bootargs and start the OS.
The boot.src doesn't contemplates an nfs filesystem and reset the bootargs variable before setting the values that seem appropriate. So U-Boot environment cannot be used to set the nfs filesystem. You will need to modify the boot.src file to have an nfs filesystem option, to do so follow the next steps:
1. Download the bootscript text file bootscript-yocto.txt, found inside the U-Boot source code under the bootscripts folder (board/boundary/bootscripts/). You can browse the github repository through the directory path until the bootscript-yocto.txt, get the raw version and save it.
2.