NVIDIA Jetson Orin Nano- Boson for FRAMOS

NVIDIA®Jetson Orin Nano™
Introduction
SoM Overview Carrier Boards NVIDIA developer kit Software Development Support
Jetpack 5.X
Getting Started Flashing the board using GUI Installer JetPack Components Kernel Compile CMD flash Performance Tuning Evaluating Performance Set Values Manually Tuning Power Maximizing Performance
Development in the Board
Getting into the Board Using Serial Console Using SSH Using Ubuntu Login Installing Packages
Camera Sensors Support
IMX219 IMX708
Contact Us

Auvidea's JNX42 is a compact carrier board compatible with both, Orin Nano, Orin NX and Xavier NX. It has a CAN bus and PCIe connectivity.

The JNX42 delivers 2 industry standard CSI-2 connectors with four lanes each.

Figure 1: Bottom view of JNX42 Carrier for NVIDIA® Jetson Orin Nano™

Figure 2: Top view of JNX42 Carrier for NVIDIA® Jetson Orin Nano™

Table 1: Auvidea's JNX42LM Carrier Board Specification

Feature	Description
HDMI out	1x
USB 2.0	1x (micro, OTG)
USB 2.0	2x (type A)
USB 3.1	1x (type A)
Networking	1x RJ45 with PoE capability
LTE	2x LTE SIM Slots(with the M.2 add-on board)
PCIe x1	1x M.2(2230) slot
PCIe x1	1x Flex port(J33)
Storage	1x Key M NVME (PCIe x4)
CAN	1x (Rx/Tx Only)
CSI-2	2x (4 lanes, 22 pin)
Debug port	yes
Fan connector	1x
Operating voltage	12-48V

You can get this board from the JNX42 Product Page