Hailo-15 SBC Single-Board-Computer

⟵ ⟶

‎

Hailo AI Platform Wiki

Table of Contents [Sticky]

• Hailo-8
  • Hailo-8 Overview
  • Software and Tools
    • Hailo AI Software Suite
    • Hailo Dataflow Compiler
    • Hailo AI Software Suite Installation
    • Hailo TAPPAS Installation
    • Hailo Commands
    • Hailo Model Scripts
• Hailo-15
  • Hailo-15 Overview
  • Hardware Setup
    • Hailo-15 SBC (Single-Board-Computer)
    • UART Connection Setup for Hailo-15
    • Serial_Monitoring
    • Hailo-15 SPI Programming
  • Image Building
    • Building a Yocto Image for Hailo-15
    • Creating a Bootable Micro SD Card for Hailo-15
    • Booting a Yocto Image on the Hailo-15 from an SD Card
  • AI Applications
    • Run an Example Application

• Hailo Available Source Code
• Contact Us
• Sponsor your Favorite Feature

Hailo-15 Single-Board-Computer

The Hailo-15 SBC consists of several components that are essential to its operation. This wiki will list each of these components and show their locations to improve the understanding and usability of the board. This is intended to familiarize you with the layout and functions of each part, thus improving your development and application experience in projects based on the Hailo-15.

1. Components

The Hailo-15 Camera Development Kit has the following components:

1. Hailo-15 SBC 12v DC power supply
2. Hailo-15 SBC with an installed heatsink
3. Hailo-15 SBC supported camera sensor
4. Halo-15 SBC camera sensor cable
5. Micro SD card (inside the SD slot)
6. USB to UART bridge card
7. USB to UART cable

Components of the Hailo-15 SBC kit. Source: Hailo-15™ SBC (Single-Board-Computer) Quick Start Guide

2. Hailo-15 SBC Components Location

The following images highlights the different components on the SBC and their locations.

Hailo-15 SBC board components and their location (front side view)

SHailo-15 SBC board components and their location (back side view)

⟵ ⟶