Xilinx ZYNQ UltraScale+ MPSoC/GStreamer/Example Pipelines/Video Decoding: Difference between revisions
Jrodriguez (talk | contribs) |
Jrodriguez (talk | contribs) No edit summary |
||
Line 3: | Line 3: | ||
</noinclude> | </noinclude> | ||
{{DISPLAYTITLE:Xilinx ZYNQ UltraScale+ Video | {{DISPLAYTITLE:Xilinx ZYNQ UltraScale+ Video Decoding using GStreamer pipelines|noerror}} | ||
The following pipelines were tested using the smartcam firmware, which is based on the kv260_ispMipiRx_vcu_DP Vitis platform provided by Xilinx. This platform contains the following input pipeline: | The following pipelines were tested using the smartcam firmware, which is based on the kv260_ispMipiRx_vcu_DP Vitis platform provided by Xilinx. This platform contains the following input pipeline: |
Revision as of 17:14, 8 December 2022
Xilinx ZYNQ UltraScale+ MPSoC | ||||
---|---|---|---|---|
Introduction | ||||
Getting Started | ||||
Xilinx Kria | ||||
Development | ||||
Development Flows Examples | ||||
GStreamer | ||||
|
||||
Contact Us |
The following pipelines were tested using the smartcam firmware, which is based on the kv260_ispMipiRx_vcu_DP Vitis platform provided by Xilinx. This platform contains the following input pipeline:
AR1335 camera -> AP1302 ISP -> MIPI CSI-2 RX Subsystem -> Video Frame Buffer Write
Network to display
For the sending pipeline please see the Video Encoding examples.
H.264
gst-launch-1.0 udpsrc port=5000 caps=application/x-rtp,media=video,clock-rate=90000,encoding-name=H264,payload=96 ! rtph264depay ! h264parse ! omxh264dec ! kmssink driver-name=xlnx bus-id=fd4a0000.display fullscreen-overlay=true
H.265
gst-launch-1.0 udpsrc port=5000 caps=application/x-rtp,media=video,clock-rate=90000,encoding-name=H265,payload=96 ! rtph265depay ! h265parse ! omxh265dec ! kmssink driver-name=xlnx bus-id=fd4a0000.display fullscreen-overlay=true