GstCUDA - Performance Profiling: Difference between revisions
No edit summary |
No edit summary |
||
Line 20: | Line 20: | ||
This measurement should be used as a reference to compare the glass to glass latency of the below pipelines with GstCUDA. | This measurement should be used as a reference to compare the glass to glass latency of the below pipelines with GstCUDA. | ||
Revision as of 00:52, 16 July 2019
← |
⌂ Home |
→ |
This page shows GstCUDA performance profiling.
Glass to glass latency
This wiki contains the glass to glass latency measurements results of GstCUDA simple capture and display pipelines on a TX2. It contains the results for all the possible GstCUDA (cudafilter and cudamux) configurations and uses cases.
All the measurements were taken using the TX2 on the high-performance mode by running the following commands:
sudo nvpmodel -m 0 #Reboot after running it, so changes can take effect. reboot sudo ~/jetson_clocks
This measurement should be used as a reference to compare the glass to glass latency of the below pipelines with GstCUDA.
← |
⌂ Home |
→ |