Jetson TX2 GStreamer example pipelines prior to Jetpack 4.2

NVIDIA®JETSON TX2™
Introduction
Getting Started
Compiling Jetson TX2 source code
NVIDIA TX2 NVP Model
GStreamer
Compile GStreamer on Jetson TX1 and TX2 Example pipelines Capture and Display Pipelines H264 H265 VP8 nvgstcapture-1.0 Example pipelines for Jetpack 4.2+ Capture and Display Encoding Decoding Streaming
Performance
Jetson TX2 video latency
V4L2 driver support
V4L2 driver for camera sensor or capture chip V4L2 drivers available for Jetson SoCs Supported camera sensors GMSL MAX96705/MAX9286 Sony IMX219 OmniVision OV5647 Omnivision OS08A10 ON Semiconductor AR0231 ON Semiconductor AR1335 Toshiba TC358743 Toshiba TC358840
HowTo's
How to enable A/B redundancy in TX2 Setting up OpenPose on TX2 OpenCV face detection for Jetson TX2
Contact Us

This wiki demonstrates how to use GStreamer to capture video from a camera, decode it from a file, display it on the screen, encode it into a file, or stream video to another device.

This wiki is divided according to the codec:

• Encoding
• Streaming

It also includes information about video capture and display using GStreamer and nvgstcapture-1.0, an application based on GStreamer and OMX to capture, encode, and save the video to the filesystem.

The Jetpack version used is the version older than Jetpack 4.2.