View source for NVIDIA Jetson Orin/In Board/Getting in Board/Ubuntu

<noinclude>
{{NVIDIA Jetson Orin/Head|previous=In Board/Getting in Board/SSH|next=In Board/Installing Packages}}
</noinclude>

{{DISPLAYTITLE:NVIDIA Jetson Orin - Developer Kit Ubuntu Login|noerror}}

This section describes how to access using each of the different mechanisms.

'''Physical configuration'''
To prepare your Jetson AGX Orin Developer Kit for use, connect it as follows:

* Connect an external HDMI display to the carrier board’s DisplayPort output port. The cable is not provided with the developer kit.
* Connect a USB keyboard and mouse.
** For USB Type-A peripherals, NVIDIA provides a USB to USB-C adapter with the developer kit. You can also connect USB Type-A peripherals to the eStata+USB connector.
** For USB Type-C peripherals, you can connect them to any of the 2 USB-C ports.
* Connect the developer kit to your local network via the Ethernet cable to the carrier board's Ethernet port.
* Connect the included AC adapter to the carrier board's power jack. Plug the AC adapter into an appropriately rated electrical outlet.
** Use only the supplied AC adapter, as it is appropriately rated for your device.

'''Logging in using Ubuntu GUI'''

After all, the physical configuration is done following these steps:

# Turn on the board.
# You should log in automatically using NVIDIA user. If you don't log in automatically use:

<syntaxhighlight lang=bash>
user:nvidia
password:nvidia
</syntaxhighlight>

or

<syntaxhighlight lang=bash>
user:ubuntu 
password:ubuntu
</syntaxhighlight>

{{Ambox
|type=notice
|small=left
|issue='''Note:''' Use the Orin as any other Ubuntu machine..
|style=width:unset;
}}

<noinclude>
{{NVIDIA Jetson Orin/Foot|In Board/Getting in Board/SSH|In Board/Installing Packages}}
</noinclude>