NVIDIA Jetson Orin NX/Camera Sensors Support/IMX219: Difference between revisions

NVIDIA Jetson Orin NX/Camera Sensors Support/IMX219 (view source)

2 bytes added , 6 February

m

no edit summary

23,798

edits

❯

Revision as of 20:45, 31 October 2024 (view source) Spalli (talk \| contribs) mNo edit summary ← Older edit		Latest revision as of 19:40, 6 February 2025 (view source) Spalli (talk \| contribs) mNo edit summary
Line 60:		Line 60:


	=Known issues=		==Known issues==
	Before enabling the IMX219 support with the jetson-io.py tool, you may find out that if you connect the camera to the development board it will be recognized by the kernel and the driver loaded. You can verify this by running the dmesg command and grepping the keyword “imx219”. You will find the “bound” message for both ports (in case you have connected both cameras at the same time).		Before enabling the IMX219 support with the jetson-io.py tool, you may find out that if you connect the camera to the development board it will be recognized by the kernel and the driver loaded. You can verify this by running the dmesg command and grepping the keyword “imx219”. You will find the “bound” message for both ports (in case you have connected both cameras at the same time).