184
edits
Raspberry Pi HQ camera IMX477 Linux driver for Jetson: Difference between revisions
Raspberry Pi HQ camera IMX477 Linux driver for Jetson (view source)
Revision as of 22:47, 2 May 2022
, 2 May 2022no edit summary
No edit summary |
|||
| Line 146: | Line 146: | ||
<div style="text-align: center;">'''Figure 7'''. Required username and password for your profile in the board.</div> | <div style="text-align: center;">'''Figure 7'''. Required username and password for your profile in the board.</div> | ||
7. Don't close the window of Figure 7 and don't modify its content yet. | 7. Don't close the window of Figure 7 and don't modify its content yet. You need to connect a screen to the board via HDMI, a keyboard/mouse via USB port, and a network cable via Ethernet port. You can remove the jumper that keeps the board in ''Recovery Mode'' and then reboot the Xavier board at this point if necessary. | ||
8. After reboot, you will be asked to accept the terms of the license' on the board's screen. Select the checkbox and press ''Continue''. | 8. After reboot, you will be asked to accept the terms of the license' on the board's screen. Select the checkbox and press ''Continue''. | ||