20,290
edits
mNo edit summary |
|||
Line 104: | Line 104: | ||
* '''NOTE:''' To set the Xavier NX developer kit in ''Recovery Mode'' the following steps are required: | * '''NOTE:''' To set the Xavier NX developer kit in ''Recovery Mode'' the following steps are required: | ||
# Ensure the device is powered off and the power adapter is disconnected. | # Ensure the device is powered off and the power adapter is disconnected. | ||
# Verify that a microSD | # Verify that a microSD card is inserted in the Jetson Xavier NX module's card slot. | ||
# Place a jumper across the Force Recovery Mode pins (9 and 10) on the button header [J14]. Please, see Figure 6 below. | # Place a jumper across the Force Recovery Mode pins (9 and 10) on the button header [J14]. Please, see Figure 6 below. | ||
# Connect your host computer to the developer kit's USB Micro-B connector. | # Connect your host computer to the developer kit's USB Micro-B connector. | ||
Line 121: | Line 121: | ||
7. Don't close the window of Figure 7 and don't modify its content yet. Yo need to connect a screen to the board via HDMI, a keyboard/mouse via USB port, and a network cable via Ethernet port. You can remove the jumper that keeps the board in ''Recovery Mode'' and then reboot the Xavier board at this point if necessary. | 7. Don't close the window of Figure 7 and don't modify its content yet. Yo need to connect a screen to the board via HDMI, a keyboard/mouse via USB port, and a network cable via Ethernet port. You can remove the jumper that keeps the board in ''Recovery Mode'' and then reboot the Xavier board at this point if necessary. | ||
8. After reboot, you will be asked to accept the | 8. After reboot, you will be asked to accept the terms of the license' on the board's screen. Select the checkbox and press ''Continue''. | ||
9. Select your language in the next screen and press ''Continue'': | 9. Select your language in the next screen and press ''Continue'': |