Lattice Crosslink:Getting the code
 | The RidgeRun FPGA Camera Emulators documentation from RidgeRun is presently being developed. |
 |
|
PCB Design
The PCB design is highly inspired by the demo board by Sam Davies. You can use the same design as him, available in EasyEDA. Moreover, a copy of the design used internally is provided along with the RTL code.
RTL Code
The RTL code for the Lattice Crosslink is available upon request. Don't hesitate to get in touch with us, providing the following information:
Host Platform: NVIDIA Jetson, x86 PC, Qualcomm RBx, NXP i.MX, Xilinx ZYNQ, etc.
- Details of the Platform:
- NVIDIA Jetson:
- Nano, TX2
- Xavier: NX, AGX
- Orin: Nano, NX, AGX
- Qualcomm:
- RBx: RB5, RB6
- NXP:
- i.MX 6
- i.MX 8
- i.MX 95
- NVIDIA Jetson:
- Operating System version, including:
- Kernel version. Use
uname -a - Distribution version (i.e., Ubuntu 20.04, Yocto Scarthgap)
- If you are on Jetson:
- Jetpack version
- L4T version
- Kernel version. Use
FPGA Platform: Lattice
- Details:
- Model
Moreover, please provide a brief description of your use case and your purpose for evaluating the project.
RidgeRun will contact you with further instructions to obtain the RTL code.
Limitations of the RTL code
The RTL code is available only for Lattice Crosslink LIFMD6000. This board is programmed with the Lattice Diamond software. Moreover, the MIPI IP core is restricted to a stream time period.
This code is intended for demo and testing purposes and not for production use, and must be used with caution.
Next steps
Please, proceed with Bring Up and Testing.