Jetson J20 imx219 glass to glass latency

From RidgeRun Developer Wiki


Problems running the pipelines shown on this page? Please see our GStreamer Debugging guide for help.

Jetson J20 imx219 glass to glass latency Introduction

This wiki is intended to be used as a reference for the Tegra X1 (TX1) capture to display glass to glass latency using the simplest GStreamer pipeline. The tests were executed with the Sony IMX219 camera sensor, for the 1080p 30fps mode. The tests were done using a modified nvcamerasrc binary provided by NVIDIA, that reduces the minimum allowed value of the queue-size property from 10 to 2 buffers. This binary was built for Jetpack 3.0 L4T 24.2.1.

Note: The reported values are the average of 10 samples.

1080p 30fps glass to glass latency

Jetson Glass to glass latency test for 1080p 30fps IMX219 camera mode

sudo ~/jetson_clocks.sh

Test pipeline

gst-launch-1.0 nvcamerasrc queue-size=6 sensor-id=0 fpsRange='30 30' ! \
'video/x-raw(memory:NVMM), width=1920, height=1080,format=I420,framerate=30/1' ! \
nvoverlaysink sync=true enable-last-sample=false

Glass to glass latency = 130 ms

frames glass to glass latency measurement method


For direct inquiries, please refer to the contact information available on our Contact page. Alternatively, you may complete and submit the form provided at the same link. We will respond to your request at our earliest opportunity.


Links to RidgeRun Resources and RidgeRun Artificial Intelligence Solutions can be found in the footer below.