Evaluating GstColorTransfer
| GStreamer Color Transfer |
|---|
|
| GStreamer Color Transfer Basics |
| Evaluating GstColorTransfer |
| Building GStreamer Color Transfer |
| PC Pipelines |
| Tegra Pipelines |
| Troubleshooting |
| Releases |
| Contact Us |
This page serves as a guide to test the GstColorTransfer evaluation binary provided by RidgeRun.
Requesting the Evaluation Binary
In order to request an evaluation binary for a specific architecture, please contact us providing the following information:
- Platform (i.e.: iMX6, NVIDIA Jetson TX1/TX2, Ultrascale+, etc...)
- gst-launch-1.0 --gst-version
- uname -a
Features in the Evaluation
To help you test GstColorTransfer, RidgeRun can provide an evaluation version of the plug-in. The following table summarizes the features available in both the professional and evaluation version of the element.
| Feature | Professional | Evaluation |
|---|---|---|
| Real-time color transfer between images | Y | Y |
| Configurable overlap region | Y | Y |
| Unlimited time | Y | N (1) |
| Source Code | Y | N |
(1) The evaluation version will limit the streaming time of each pad to 1 minute after a 5 seconds delay (at 30fps).
Testing the Binary
please make sure you also install the dependencies listed below :
sudo apt-get install gtk-doc-tools libgtk2.0-dev libgstreamer-plugins-base1.0-dev libgstreamer-plugins-bad1.0-dev sudo apt-get install gstreamer1.0-tools gstreamer1.0-plugins-base-dbg gstreamer1.0-plugins-good-dbg gstreamer1.0-plugins-bad-dbg gstreamer1.0-libav-dbg
RidgeRun should've provided you with a shared object:
- GStreamer Plug-in
- libgstcolortransfer.so
In order to use the binary provided, export the location of the plugin in your environment.
export GST_PLUGIN_PATH=${GST_PLUGIN_PATH}:/path/to/evaluation/binary/plugin
where /path/to/evaluation/binary/plugin is the location in your file system where you have the plugin provided by RidgeRun. Additionally, you may just copy the binary into the standard GStreamer plug-in search path.
Finally, test that the plugin is being properly picked up by GStreamer by running:
gst-inspect-1.0 colortransfer
You should see the inspect output for the evaluation binary.
Example Pipelines
Please refer to the Examples page for reference pipelines.
Troubleshooting
The first level of debug to troubleshoot a failing evaluation binary is to inspect GStreamer debug output.
GST_DEBUG=2 gst-launch-1.0
If the output doesn't help you figure out the problem, please contact support@ridgerun.com with the output of the GStreamer debug and any additional information you consider useful.
If the plug-in is not being recognized, please provide the output of the following command:
gst-inspect-1.0 libgstcolortransfer.so