DSP Framework for DM8168
|
|
Getting the code
The DSP Framework is a set of Makefile based classes integrated into the RidgeRun SDK simplifying the process of creating, compiling, and deploying DM8168 and DM8148 DSP algorithms. DSP Framework supports ARM / DSP interaction, simplifying the offload of ARM intensive audio / video algorithms to the DSP. The RidgeRun GStreamer DSP wrapper plugin allows your DSP audio or video processing algorithm to be exposed to ARM side applications as just another GStreamer element, so you can easily deploy your proproitary DSP algorithm in many different product configurations. Purchase of the DSP Framework SDK add-on includes full RidgeRun source code.
Download
DSP Framework is an add-on to RidgeRun's professional SDK. You can purchase the DSP Framework using the shopping cart added above.
SDK enhancements
The DSP Framework add-on extends the RidgeRun professional SDK by providing:
- Extra kernel configuration
- Real time class
- Real time builder scripts
- Patches
Each of these extensions is explained below.
Kernel configuration
On the DM8168 and DM8148 SoCs, ARM and DSP can share a portion of SDRAM memory. When the DSP isn't used, this shared memory is given to Linux to control as memory partition 2. With the DSP in use, memory partition 2 sizing needs to be adjusted to meet the DSP algorithm requirements, leaving the rest of memory parition 2 to Linux.
As a first step, remove the second partition from Linux control by adjusting the kernel command line arguments:
cd $DEVDIR
make config
-> Kernel configuration
-> (mem=364M@0x80000000 vmalloc=512M vram=81M) Extra kernel arguments
Once the DSP code is in place and working, you can examine the actual shared memory usage and give unused memory (often as much as 75%) back to Linux as partition 2.
Real time class
The real time class contains the logic to build real time content for DSP. It is composed of two files:
- rtsc.class
- rtsc.defs
You can find them in the following path:
$DEVDIR/bsp/classes
To see all the features added, refer to the SDK documentation:
cd $DEVDIR make doc firefox documentation/html/index.html <pre> and refer to the RTSC module. === Real time builder scripts === xdctools is the DSP's builder package. The SDK integrates XDC scripts to build the DSP firmware. the releated tools are located in: <pre> $DEVDIR/bsp/arch/rtsc
Patches
There are two patches needed to build and run the DSP code. These patches are:
- dsp-xdctools-sections-directive-removal.patch
- dsp-codec-engine-support.patch
You can find the patches in the following path:
$DEVDIR/proprietary/ezsdk-*/patches
GStreamer DSP wrapper demo
DSP GStreamer wrapper is a demo that allows ARM-side GStreamer pipelines to interact with the DSP algorithms. The demo source is located at:
$DEVDIR/myapps/rr-dsp-gstWrapper
The demo will be built if selected via the configuration menu.
cd $DEVDIR
make config
-> User Applications
-> RidgeRun DSP GStreamer Wrapper Plugin
Also, it can be built manually:
cd $DEVDIR/myapps/rr-dsp-gstWrapper make make install
To test the demo, you can run the following pipelines:
EVM board
gst-launch videotestsrc ! "video/x-raw-yuv, width=1280, height=720, \ framerate=(fraction)30/1, format=(fourcc)NV12" ! dspwrapper ! omx_scaler \ ! omx_tvp ! omx_ctrl display-mode=OMX_DC_MODE_1080P_60 ! omx_videosink sync=false -v
Z3 board
gst-launch videotestsrc num-buffers=90 ! "video/x-raw-yuv, width=1280, height=720, \ framerate=(fraction)30/1, format=(fourcc)NV12" ! dspwrapper ! omx_scaler ! omx_ctrl \ display-mode=OMX_DC_MODE_1080P_60 ! omx_videosink sync=false -v
For direct inquiries, please refer to the contact information available on our Contact page. Alternatively, you may complete and submit the form provided at the same link. We will respond to your request at our earliest opportunity.
Links to RidgeRun Resources and RidgeRun Artificial Intelligence Solutions can be found in the footer below.
ARTIFICIAL INTELLIGENCE
