A Plug-in/Getting Started/Build & installing the TI J7 SDKs
Getting the Linux SDK
# Get the SDK installer $ wget https://software-dl.ti.com/jacinto7/esd/processor-sdk-linux-jacinto7/07_03_00_05/exports/ti-processor-sdk-linux-j7-evm-07_03_00_05-Linux-x86-Install.bin # Give the SDK execution permissions $ chmod +x ti-processor-sdk-linux-j7-evm-07_03_00_05-Linux-x86-Install.bin # Execute the SDK installer $ ./ti-processor-sdk-linux-j7-evm-07_03_00_05-Linux-x86-Install.bin
Follow the SDK installer instructions, and at the "Choose Destination Location", add the directory with the SDK name at the current directory:
# ti-processor-sdk-linux-j7-evm-07_03_00_05-linux
# Get into the SDK workspace and run the setup script $ cd ti-processor-sdk-linux-j7-evm-07_03_00_05-linux/ $ ./setup.sh
Flash the SD card
Requirements
- Inserted SD card into the PC
# Detect the SD card device on your computer: Plug in and plug out the SD card with this command running $ watch ls /dev/* # Select the SD device, and flash $ SD_DEVICE=/dev/mmcblk0 $ sudo bin/mksdboot.sh --device $SD_DEVICE --sdk .