GStreamer WebRTC Wrapper - GStreamer Pipelines - OWR Pipelines
GStreamer WebRTC Wrapper |
---|
Introduction |
Architecture |
|
Evaluating GstWebRTCWrapper |
Getting the Code |
GStreamer Pipelines |
Other WebRTC RidgeRun products |
Contact Us |
Description
This page presents some GStreamer examples pipeline on supported platforms using the OpenWebRTC (OWR) Demo.
Launch OWR Demo
1. Install nodejs
sudo apt install nodejs
2. Start signaler
cd <path-to-gst-webrtc-wrapper>/tests/examples/signalers/owr node signaler.js
3. Start web client in the PC. By default the web client starts at port 8080. To use a different port provide it as an argument at the end.
#Start web client at port 8080 cd <path-to-gst-webrtc-wrapper>/tests/examples/signalers/owr node owr_web_client_example.js #Start web client at port 8082 cd <path-to-gst-webrtc-wrapper>/tests/examples/signalers/owr node owr_web_client_example.js 8082
4. Enter the web client at http://localhost:8080/ (remember to change port accordingly) and type the server (signaler) url where the it is running. For example: http://10.251.101.124:8081, where 10.251.101.124 is the IP address of the system where the signaler is running. Then press join in the web client.
5. To setup the WebRTC sender (media server) use one of the pipelines in the following sections.
Pipeline examples per platform
x86
Unidirectional
Video
H.264
SESSION_ID=59078bedca1 SERVER_URL=http://localhost:8081 gst-launch-1.0 webrtcwrapperbin start-call=true signaler=GstOwrSignaler \ signaler::server_url=${SERVER_URL} \ signaler::session_id=${SESSION_ID} name=web videotestsrc is-live=true ! queue ! videoconvert ! \ x264enc key-int-max=2 ! rtph264pay ! web.video_sink
VP8
SESSION_ID=59078bedca1 SERVER_URL=http://localhost:8081 gst-launch-1.0 webrtcwrapperbin start-call=true signaler=GstOwrSignaler \ signaler::server_url=${SERVER_URL} \ signaler::session_id=${SESSION_ID} name=web videotestsrc is-live=true ! queue ! videoconvert ! \ vp8enc ! rtpvp8pay ! web.video_sink
Nvidia Jetson devices
The following pipelines may be launched in the Nvidia Jetson devices: TX1, TX2, Nano, Xavier AGX/NX
Unidirectional
Video
H.264
SESSION_ID=59078bedca1 SERVER_URL=http://localhost:8081 gst-launch-1.0 nvarguscamerasrc sensor-id=0 ! nvvidconv ! queue leaky=2 max-size-buffers=5 ! nvv4l2h264enc maxperf-enable=1 ! rtph264pay ! webrtcwrapperbin signaler=GstOwrSignaler signaler::server_url=${SERVER_URL} signaler::session_id=${SESSION_ID} start-call=true name=web
VP8
SESSION_ID=59078bedca1 SERVER_URL=http://localhost:8081 gst-launch-1.0 nvarguscamerasrc sensor-id=0 ! nvvidconv ! queue leaky=2 max-size-buffers=5 ! nvv4l2vp8enc maxperf-enable=1 ! rtpvp8pay ! webrtcwrapperbin signaler=GstOwrSignaler signaler::server_url=${SERVER_URL} signaler::session_id=${SESSION_ID} start-call=true name=web