View source for AM572X boot-info-log

<seo title="AM572X boot-info-log | RidgeRun" titlemode="replace" metakeywords="GStreamer, Linux SDK, Linux BSP,  Embedded Linux, Device Drivers, Nvidia, Xilinx, TI, NXP, Freescale, Embedded Linux driver development, Linux Software development, Embedded Linux SDK, Embedded Linux Application development, GStreamer Multimedia Framework." description="On this wiki page you can find information on the AM572 Boot Info Log."></seo>

<pre style="background:#FFFFC0">U-Boot 2010.06 (Apr 29 2013 - 15:46:20)
U-Boot SPL 2015.07 (Jun 30 2016 - 18:21:30)
DRA752-GP ES2.0
reading args
spl_load_image_fat_os: error reading image args, err - -1
reading u-boot.img
reading u-boot.img


U-Boot 2015.07 (Jun 30 2016 - 18:21:30 -0600)

CPU  : DRA752-GP ES2.0
Board: AM572x EVM REV A.30
I2C:   ready
DRAM:  2 GiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
reading uboot.env

** Unable to read "uboot.env" from mmc0:1 **
Using default environment

SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst 
SCSI:  SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst 
scanning bus for devices...
Found 0 device(s).
Net:   <ethaddr> not set. Validating first E-fuse MAC
cpsw
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
** Unable to read file boot.scr **
reading uEnv.txt
80 bytes read in 2 ms (39.1 KiB/s)
Loaded env from uEnv.txt
Importing environment from mmc0 ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading zImage
3398312 bytes read in 173 ms (18.7 MiB/s)
reading am57xx-evm-es2plus.dtb
101535 bytes read in 10 ms (9.7 MiB/s)
Booting from mmc0 ...
Kernel image @ 0x82000000 [ 0x000000 - 0x33daa8 ]
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Device Tree to 8ffe4000, end 8ffffc9e ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.18-gbbe8cfc (dgarbanzo@ridgerun-GA-890FXA-UD5) (gcc version 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #1 SMP PREEMPT Tue Jun 28 14:23:30 CST 2016
[    0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: TI AM572x EVM ES2+
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB
[    0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB
[    0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB
[    0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB
[    0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool
[    0.000000] cma: Reserved 24 MiB at 0x00000000fe400000
[    0.000000] Forcing write-allocate cache policy for SMP
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] OMAP4: Map 0x00000000ffd00000 to fe600000 for dram barrier
[    0.000000] DRA752 ES2.0
[    0.000000] PERCPU: Embedded 12 pages/cpu @ee52e000 s17088 r8192 d23872 u49152
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 472658
[    0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1681172K/1897472K available (6347K kernel code, 287K rwdata, 2200K rodata, 336K init, 258K bss, 27884K reserved, 188416K cma-reserved, 1291264K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0861074   (8549 kB)
[    0.000000]       .init : 0xc0862000 - 0xc08b6000   ( 336 kB)
[    0.000000]       .data : 0xc08b6000 - 0xc08fdca8   ( 288 kB)
[    0.000000]        .bss : 0xc0900000 - 0xc0940930   ( 259 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Additional per-CPU info printed with stalls.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] OMAP clockevent source: timer1 at 32768 Hz
[    0.000000] clocksource 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
[    0.000030] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000427] Architected cp15 timer(s) running at 6.14MHz (virt).
[    0.000457] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns
[    0.000462] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns
[    0.000473] Switching to timer-based delay loop, resolution 162ns
[    0.001010] Console: colour dummy device 80x30
[    0.001025] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2'
[    0.001032] This ensures that you still see kernel messages. Please
[    0.001037] update your kernel commandline.
[    0.001050] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475)
[    0.001064] pid_max: default: 32768 minimum: 301
[    0.001146] Security Framework initialized
[    0.001183] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001192] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001721] Initializing cgroup subsys blkio
[    0.001734] Initializing cgroup subsys memory
[    0.001760] Initializing cgroup subsys devices
[    0.001772] Initializing cgroup subsys freezer
[    0.001785] Initializing cgroup subsys perf_event
[    0.001807] CPU: Testing write buffer coherency: ok
[    0.002047] /cpus/cpu@0 missing clock-frequency property
[    0.002093] /cpus/cpu@1 missing clock-frequency property
[    0.002103] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002138] Setting up static identity map for 0x800082c0 - 0x80008318
[    0.060796] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.060856] Brought up 2 CPUs
[    0.060870] SMP: Total of 2 processors activated (24.59 BogoMIPS).
[    0.060876] CPU: All CPU(s) started in SVC mode.
[    0.061256] devtmpfs: initialized
[    0.087583] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.088373] omap_hwmod: l3_main_2 using broken dt data from ocp
[    0.281448] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.285412] pinctrl core: initialized pinctrl subsystem
[    0.286233] NET: Registered protocol family 16
[    0.287122] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.310618] cpuidle: using governor ladder
[    0.340647] cpuidle: using governor menu
[    0.348946] OMAP GPIO hardware version 0.1
[    0.355342] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 !
[    0.380391] No ATAGs?
[    0.380420] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.380429] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.380913] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[    0.380923] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[    0.381504] OMAP DMA hardware revision 0.0
[    0.416405] edma 43300000.edma: memcpy is disabled
[    0.421290] edma 43300000.edma: TI EDMA DMA engine driver
[    0.424148] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
[    0.429466] omap-iommu 40d01000.mmu: 40d01000.mmu registered
[    0.429644] omap-iommu 40d02000.mmu: 40d02000.mmu registered
[    0.429800] omap-iommu 58882000.mmu: 58882000.mmu registered
[    0.429950] omap-iommu 55082000.mmu: 55082000.mmu registered
[    0.430216] omap-iommu 41501000.mmu: 41501000.mmu registered
[    0.430402] omap-iommu 41502000.mmu: 41502000.mmu registered
[    0.430635] vgaarb: loaded
[    0.431026] SCSI subsystem initialized
[    0.432144] palmas 0-0058: Irq flag is 0x00000008
[    0.452511] palmas 0-0058: Muxing GPIO fd, PWM 0, LED 0
[    0.534725] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[    0.535279] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz
[    0.535849] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz
[    0.536049] media: Linux media interface: v0.10
[    0.536106] Linux video capture interface: v2.00
[    0.536148] pps_core: LinuxPPS API ver. 1 registered
[    0.536155] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.536181] PTP clock support registered
[    0.536780] omap-mailbox 4883c000.mailbox: omap mailbox rev 0x400
[    0.537073] omap-mailbox 4883e000.mailbox: omap mailbox rev 0x400
[    0.537354] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
[    0.537636] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
[    0.537907] Advanced Linux Sound Architecture Driver Initialized.
[    0.538524] Switched to clocksource arch_sys_counter
[    0.548747] NET: Registered protocol family 2
[    0.549293] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.549361] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.549485] TCP: Hash tables configured (established 8192 bind 8192)
[    0.549534] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.549565] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.549711] NET: Registered protocol family 1
[    0.549938] RPC: Registered named UNIX socket transport module.
[    0.549947] RPC: Registered udp transport module.
[    0.549953] RPC: Registered tcp transport module.
[    0.549959] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.550944] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
[    0.550978] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    0.552771] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.552850] audit: initializing netlink subsys (disabled)
[    0.552880] audit: type=2000 audit(0.530:1): initialized
[    0.560147] VFS: Disk quotas dquot_6.6.0
[    0.560316] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.562272] NFS: Registering the id_resolver key type
[    0.562298] Key type id_resolver registered
[    0.562306] Key type id_legacy registered
[    0.562360] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.563681] NET: Registered protocol family 38
[    0.563758] bounce: pool size: 64 pages
[    0.563913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.563930] io scheduler noop registered
[    0.563942] io scheduler deadline registered
[    0.563977] io scheduler cfq registered (default)
[    0.567479] pinctrl-single 4a003400.pinmux: 281 pins at pa fc003400 size 1124
[    0.576910] omap_hwmod: ocp2scp3: _wait_target_disable failed
[    0.607311] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00
[    0.607324] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[    0.607335] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff]
[    0.607346] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.607451] pci 0000:00:00.0: IOMMU is currently not supported for PCI
[    0.607723] PCI: bus0: Fast back to back transfers disabled
[    0.607852] PCI: bus1: Fast back to back transfers enabled
[    0.607948] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff]
[    0.607962] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff]
[    0.607975] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.608942] backlight supply power not found, using dummy regulator
[    0.611899] OMAP DSS rev 6.1
[    0.612160] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops)
[    0.612677] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops)
[    0.617219] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[    0.620212] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250
[    1.602607] console [ttyS2] enabled
[    1.606723] 48422000.serial: ttyS7 at MMIO 0x48422000 (irq = 302, base_baud = 3000000) is a 8250
[    1.616740] [drm] Initialized drm 1.1.0 20060810
[    1.629898] brd: module loaded
[    1.637130] loop: module loaded
[    1.641294] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.698538] davinci_mdio 48485000.mdio: davinci mdio revision 1.6
[    1.704663] davinci_mdio 48485000.mdio: detected phy mask fffffff9
[    1.714825] libphy: 48485000.mdio: probed
[    1.718876] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY
[    1.728585] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver Micrel KSZ9031 Gigabit PHY
[    1.738877] cpsw 48484000.ethernet: Detected MACID = a0:f6:fd:ab:af:1c
[    1.746142] cpsw 48484000.ethernet: cpsw: Detected MACID = a0:f6:fd:ab:af:1d
[    1.754520] mousedev: PS/2 mouse device common for all mice
[    1.760139] i2c /dev entries driver
[    1.766006] gpio-fan gpio_fan: GPIO fan initialized
[    1.771831] tmp102 0-0048: initialized
[    1.777563] omap_hsmmc 4809c000.mmc: Got CD GPIO
[    1.782637] vdd_3v3: supplied by regen1
[    1.819170] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode
[    1.825551] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode
[    1.897989] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.908881] ledtrig-cpu: registered to indicate activity on CPUs
[    1.909499] mmc0: new high speed SDHC card at address aaaa
[    1.909825] mmcblk0: mmc0:aaaa SL08G 7.40 GiB 
[    1.925889]  mmcblk0: p1 p2
[    1.929744] oprofile: using timer interrupt.
[    1.934223] Initializing XFRM netlink socket
[    1.938591] NET: Registered protocol family 17
[    1.943080] NET: Registered protocol family 15
[    1.947608] Key type dns_resolver registered
[    1.952027] omap_voltage_late_init: Voltage driver support not added
[    1.958683] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm
[    1.964978] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm
[    1.971831] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm
[    1.973188] mmc1: MAN_BKOPS_EN bit is not set
[    1.982049] mmc1: new DDR MMC card at address 0001
[    1.982370] mmcblk1: mmc1:0001 S10004 3.56 GiB 
[    1.982508] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB
[    1.982614] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB
[    1.983198]  mmcblk1: p1 p2
[    2.006583] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm
[    2.014455] Power Management for TI OMAP4+ devices.
[    2.019605] ThumbEE CPU extension supported.
[    2.023899] Registering SWP/SWPB emulation handler
[    2.029734] dmm 4e000000.dmm: workaround for errata i878 in use
[    2.036921] dmm 4e000000.dmm: initialized all PAT entries
[    2.060414] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.067053] [drm] No driver support for vblank timestamp query.
[    2.075005] [drm] Enabling DMM ywrap scrolling
[    2.120496] Console: switching to colour frame buffer device 100x30
[    2.128645] omapdrm omapdrm.0: fb0: omapdrm frame buffer device
[    2.134587] omapdrm omapdrm.0: registered panic notifier
[    2.168642] omapwb-m2m: Device registered as video10
[    2.173626] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0
[    2.179837] hctosys: unable to open rtc device (rtc0)
[    2.193105] ldousb: disabling
[    2.196351] vmmcwl_fixed: disabling
[    2.199871] aic_dvdd_fixed: disabling
[    2.203688] ALSA device list:
[    2.206663]   No soundcards found.
[    2.210559] Waiting 2 sec before mounting root device...
[    4.220649] EXT3-fs (mmcblk0p2): recovery required on readonly filesystem
[    4.227469] EXT3-fs (mmcblk0p2): write access will be enabled during recovery
[    4.236055] kjournald starting.  Commit interval 5 seconds
[    4.241175] EXT3-fs (mmcblk0p2): recovery complete
[    4.241180] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    4.241207] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
[    4.242450] devtmpfs: mounted
[    4.242666] Freeing unused kernel memory: 336K (c0862000 - c08b6000)
starting pid 60, tty '': '/etc/rcS'
loading modules
no /etc/modules, exiting
[    4.374110] EXT3-fs (mmcblk0p2): using internal journal
Starting System
done.
Welcome to
__________ .__     .___               __________                
\______   \|__|  __| _/  ____    ____ \______   \ __ __   ____  
 |       _/|  | / __ |  / ___\ _/ __ \ |       _/|  |  \ /    \ 
 |    |   \|  |/ /_/ | / /_/  >\  ___/ |    |   \|  |  /|   |  \
 |____|_  /|__|\____ | \___  /  \___  >|____|_  /|____/ |___|  /
        \/          \//_____/       \/        \/             \/ 
	   
    Embedded Linux Solutions
 
For further information see:
http://www.ridgerun.com
[    4.684839] net eth0: initializing cpsw version 1.15 (0)
Build host: ridgerun-GA-890FXA-UD5
Built by: dgarbanzo
Build date: Thu, 30 Jun 2016 18:20:29 -0600
Build tag: am5728-tievm
Configuring network interfaces
[    4.790349] net eth0: phy found : id is : 0x221622
[    7.795438] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    8.167339] net eth1: initializing cpsw version 1.15 (0)
[    8.250431] net eth1: phy found : id is : 0x221622
Starting D-Bus message bus system
[    8.319111] random: dbus-daemon urandom read with 25 bits of entropy available
Starting tiipclad daemon
GateMP support enabled on host

Opened log file: lad.txt

numProcessors = 5 id = 0 baseId = 0

Spawned daemon: /usr/bin/lad_dra7xx

.
Starting udev
[    8.421401] udevd[171]: starting version 182
[    8.562337] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000
[    8.571744]  remoteproc0: 58820000.ipu is available
[    8.578098]  remoteproc0: Note: remoteproc is still under development and considered experimental.
[    8.614981]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    8.659171] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000
[    8.669915]  remoteproc1: 55020000.ipu is available
[    8.675045]  remoteproc1: Note: remoteproc is still under development and considered experimental.
[    8.729097]  remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    8.743321] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc2
[    8.752290] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000
[    8.762322]  remoteproc2: 40800000.dsp is available
[    8.772069]  remoteproc2: Note: remoteproc is still under development and considered experimental.
[    8.785278]  remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    8.813618] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000
[    8.855477]  remoteproc3: 41000000.dsp is available
[    8.861333]  remoteproc3: Note: remoteproc is still under development and considered experimental.
[    8.870765]  remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    8.884203] input: pixcir_tangoc as /devices/platform/44000000.ocp/4807c000.i2c/i2c-4/4-005c/input/input0
[    8.885320] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    8.933239] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1
[    8.949021] rtc-ds1307 2-006f: SET TIME!
[    8.953901] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0
[    8.961025] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2
[    8.967118] rtc-ds1307 2-006f: 64 bytes nvram
[    8.974818] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3
[    8.981115] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3
[    8.998148] palmas_pwrbutton 48070000.i2c:tps659038@58:tps659038_pwr_button: h/w controlled shutdown duration=12 seconds
[    9.010734] input: palmas_pwron as /devices/platform/44000000.ocp/48070000.i2c/i2c-0/0-0058/48070000.i2c:tps659038@58:tps659038_pwr_button/input/input1
[    9.059863] input: gpio_keys as /devices/platform/gpio_keys/input/input2
[    9.061928] mt9t11x 4-003c: input-clock-freq: 32000000
[    9.061932] mt9t11x 4-003c: pixel-clock-freq: 96000000
[    9.088163] mt9t11x 4-003c: Product ID error ffffff87
[    9.240262]  remoteproc1: registered virtio0 (type 7)
[    9.247920] pruss-rproc 4b200000.pruss: creating platform devices for PRU cores
[    9.258648] pruss-rproc 4b280000.pruss: creating platform devices for PRU cores
[    9.285648]  remoteproc1: powering up 55020000.ipu
[    9.286363]  remoteproc4: 4b234000.pru0 is available
[    9.286366]  remoteproc4: Note: remoteproc is still under development and considered experimental.
[    9.286370]  remoteproc4: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    9.304769]  remoteproc4: powering up 4b234000.pru0
[    9.304776]  remoteproc4: Booting fw image am57xx-pru1_0-fw, size 80704
[    9.304810] pruss-rproc 4b200000.pruss: configured system_events = 0x1000000000000000 intr_channels = 0x00000001 host_intr = 0x00000001
[    9.304814]  remoteproc4: remote processor 4b234000.pru0 is now up
[    9.304880] virtio_rpmsg_bus virtio1: rpmsg host is online
[    9.305426]  remoteproc4: registered virtio1 (type 7)
[    9.305463] virtio_rpmsg_bus virtio1: creating channel rpmsg-pru addr 0x1e
[    9.305667] pru-rproc 4b234000.pru0: PRU rproc node /ocp/pruss@4b200000/pru0@4b234000 probed successfully
[    9.305851]  remoteproc5: 4b238000.pru1 is available
[    9.305854]  remoteproc5: Note: remoteproc is still under development and considered experimental.
[    9.305857]  remoteproc5: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    9.310964] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok
[    9.374369] vip 48990000.vip: loading firmware vpdma-1b8.bin
[    9.398592] vip 48990000.vip: VPDMA firmware loaded
[    9.403464] (stk) :sysfs entries created
[    9.424552]  remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3493264
[    9.431979] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1
[    9.491985]  remoteproc1: remote processor 55020000.ipu is now up
[    9.499156] virtio_rpmsg_bus virtio0: rpmsg host is online
[    9.504700] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65
[    9.515954] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20
[    9.523060] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x66
[    9.550795] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3
[    9.755169]  remoteproc5: powering up 4b238000.pru1
[    9.760110]  remoteproc5: Booting fw image am57xx-pru1_1-fw, size 80712
[    9.767018] pruss-rproc 4b200000.pruss: configured system_events = 0x0800000000000000 intr_channels = 0x00000002 host_intr = 0x00000002
[    9.767959] aic_dvdd_fixed: supplied by vdd_3v3
[    9.781597] asoc-simple-card sound@0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok
[    9.792494]  remoteproc5: remote processor 4b238000.pru1 is now up
[    9.805419] virtio_rpmsg_bus virtio2: rpmsg host is online
[    9.810969]  remoteproc5: registered virtio2 (type 7)
[    9.816134] pru-rproc 4b238000.pru1: PRU rproc node /ocp/pruss@4b200000/pru1@4b238000 probed successfully
[    9.826091] virtio_rpmsg_bus virtio2: creating channel rpmsg-pru addr 0x1f
[    9.833430]  remoteproc6: 4b2b4000.pru0 is available
[    9.838422]  remoteproc6: Note: remoteproc is still under development and considered experimental.
[    9.847572]  remoteproc6: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    9.877449] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin
[    9.898716] vpe 489d0000.vpe: Device registered as /dev/video0
[    9.952947]  remoteproc6: powering up 4b2b4000.pru0
[    9.957852]  remoteproc6: Booting fw image am57xx-pru2_0-fw, size 80704
[    9.965077] pruss-rproc 4b280000.pruss: configured system_events = 0x1000000000000000 intr_channels = 0x00000001 host_intr = 0x00000001
[    9.977325]  remoteproc6: remote processor 4b2b4000.pru0 is now up
[    9.983659] virtio_rpmsg_bus virtio3: rpmsg host is online
[    9.989717]  remoteproc6: registered virtio3 (type 7)
[    9.994821] pru-rproc 4b2b4000.pru0: PRU rproc node /ocp/pruss@4b280000/pru0@4b2b4000 probed successfully
[   10.005064] virtio_rpmsg_bus virtio3: creating channel rpmsg-pru addr 0x20
[   10.008834]  remoteproc7: 4b2b8000.pru1 is available
[   10.008838]  remoteproc7: Note: remoteproc is still under development and considered experimental.
[   10.008841]  remoteproc7: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[   10.045196]  remoteproc0: powering up 58820000.ipu
[   10.050054]  remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4917392
[   10.057070] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1
[   10.068320]  remoteproc0: remote processor 58820000.ipu is now up
[   10.074939] virtio_rpmsg_bus virtio4: rpmsg host is online
[   10.080948]  remoteproc0: registered virtio4 (type 7)
[   10.086589] virtio_rpmsg_bus virtio4: creating channel rpmsg-client-sample addr 0x32
[   10.097880] virtio_rpmsg_bus virtio4: creating channel rpmsg-client-sample addr 0x33
[   10.105946] virtio_rpmsg_bus virtio4: creating channel rpmsg-omx addr 0x3c
[   10.114010] virtio_rpmsg_bus virtio4: creating channel rpmsg-rpc addr 0x65
[   10.164307] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled
[   10.171188] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[   10.179852] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst 
[   10.190134] scsi host0: ahci
[   10.193404] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 358
[   10.206506]  remoteproc7: powering up 4b2b8000.pru1
[   10.211441]  remoteproc7: Booting fw image am57xx-pru2_1-fw, size 80712
[   10.218108] pruss-rproc 4b280000.pruss: configured system_events = 0x0800000000000000 intr_channels = 0x00000002 host_intr = 0x00000002
[   10.230414]  remoteproc7: remote processor 4b2b8000.pru1 is now up
[   10.236722] virtio_rpmsg_bus virtio5: rpmsg host is online
[   10.236744] virtio_rpmsg_bus virtio5: creating channel rpmsg-pru addr 0x21
[   10.249532]  remoteproc7: registered virtio5 (type 7)
[   10.254630] pru-rproc 4b2b8000.pru1: PRU rproc node /ocp/pruss@4b280000/pru1@4b2b8000 probed successfully
[   10.362070] rpmsg_pru rpmsg0: new rpmsg_pru device: /dev/rpmsg_pru30
[   10.368789] rpmsg_pru rpmsg3: new rpmsg_pru device: /dev/rpmsg_pru31
[   10.375852] rpmsg_pru rpmsg4: new rpmsg_pru device: /dev/rpmsg_pru32
[   10.382459] rpmsg_pru rpmsg9: new rpmsg_pru device: /dev/rpmsg_pru33
[   10.413137] rpmsg_rpc rpmsg1: probing service dce-callback with src 1024 dst 101
[   10.428749] rpmsg_rpc rpmsg2: probing service rpmsg-dce with src 1025 dst 102
[   10.435946] rpmsg_rpc rpmsg1: published functions = 4
[   10.441509] rpmsg_rpc rpmsg8: probing service rpc_example_2 with src 1024 dst 101
[   10.449110] rpmsg_rpc rpmsg2: published functions = 8
[   10.456484] rpmsg_rpc rpmsg8: published functions = 8
[   10.558541] ata1: SATA link down (SStatus 0 SControl 300)
[   11.155446] usbcore: registered new interface driver usbfs
[   11.161055] usbcore: registered new interface driver hub
[   11.166468] usbcore: registered new device driver usb
[   11.526625] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   11.532244] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[   11.540476] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010
[   11.549335] xhci-hcd xhci-hcd.1.auto: irq 452, io mem 0x48890000
[   11.555534] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   11.562486] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.569879] usb usb1: Product: xHCI Host Controller
[   11.574787] usb usb1: Manufacturer: Linux 4.1.18-gbbe8cfc xhci-hcd
[   11.581018] usb usb1: SerialNumber: xhci-hcd.1.auto
[   11.587247] hub 1-0:1.0: USB hub found
[   11.591075] hub 1-0:1.0: 1 port detected
[   11.595417] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   11.600963] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[   11.608752] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   11.617007] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[   11.623851] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.631154] usb usb2: Product: xHCI Host Controller
[   11.636066] usb usb2: Manufacturer: Linux 4.1.18-gbbe8cfc xhci-hcd
[   11.642302] usb usb2: SerialNumber: xhci-hcd.1.auto
[   11.647868] hub 2-0:1.0: USB hub found
[   11.651700] hub 2-0:1.0: 1 port detected

Please press Enter to activate this console. [   11.908583] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[   11.968585] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[   11.988803] usb 2-1: New USB device found, idVendor=0451, idProduct=8140
[   11.996084] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   12.008934] hub 2-1:1.0: USB hub found
[   12.012911] hub 2-1:1.0: 4 ports detected
[   12.048875] usb 1-1: New USB device found, idVendor=0451, idProduct=8142
[   12.055610] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[   12.063261] usb 1-1: SerialNumber: 580B1849DF41
[   12.088946] hub 1-1:1.0: USB hub found
[   12.092763] hub 1-1:1.0: 4 ports detected
[   12.580453]  remoteproc3: powering up 41000000.dsp
[   12.585692]  remoteproc2: powering up 40800000.dsp
[   12.590561]  remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 21365636
[   12.597802]  remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 21365636
[   12.604566] omap_hwmod: mmu0_dsp1: _wait_target_disable failed
[   12.604603] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0
[   12.604659] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0
[   12.620435]  remoteproc2: remote processor 40800000.dsp is now up
[   12.622737] virtio_rpmsg_bus virtio7: rpmsg host is online
[   12.622797]  remoteproc2: registered virtio7 (type 7)
[   12.646315] omap_hwmod: mmu0_dsp2: _wait_target_disable failed
[   12.652203] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0
[   12.658116] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0
[   12.675392]  remoteproc3: remote processor 41000000.dsp is now up
[   12.679293] virtio_rpmsg_bus virtio7: creating channel rpmsg-proto addr 0x3d
[   12.690132] virtio_rpmsg_bus virtio6: rpmsg host is online
[   12.690215] virtio_rpmsg_bus virtio6: creating channel rpmsg-proto addr 0x3d
[   12.703472]  remoteproc3: registered virtio6 (type 7)
[   12.713028] NET: Registered protocol family 41
[   14.934788] random: nonblocking pool is initialized
[   21.073554] omap_hwmod: mmu_ipu1: _wait_target_disable failed
[   21.086512] omap_hwmod: mmu_ipu2: _wait_target_disable failed
[   23.055948] omap_hwmod: mmu1_dsp2: _wait_target_disable failed
[   23.068915] omap_hwmod: mmu0_dsp2: _wait_target_disable failed
[   23.095969] omap_hwmod: mmu1_dsp1: _wait_target_disable failed
[   23.108954] omap_hwmod: mmu0_dsp1: _wait_target_disable failed

starting pid 282, tty '/dev/ttyS2': '-/bin/sh'


BusyBox v1.20.2 (2016-06-28 14:28:43 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/ # 
</pre>

[[Category:AM572X]]