View source for NVIDIA Jetson Orin/Introduction/Carrier Boards/Auvidea X230D

<noinclude>
{{NVIDIA Jetson Orin/Head|previous=Introduction/Carrier Boards/Nvidia developer kit|next=Introduction/Carrier_Boards/Connect Tech Forge|keywords=carrier,carrier board,base board,auvidea}}
</noinclude>
<!-- If you want a custom title for the page, un-comment and edit this line:
{{DISPLAYTITLE:NVIDIA Jetson Xavier - <descriptive page name>|noerror}}
-->

Forge is Connect Tech’s first full-featured Carrier Board for the NVIDIA® Jetson AGX Orin™ module. This carrier board for Jetson AGX Orin™ is specifically designed for commercially deployable platforms and has a small footprint of 155mm x 125mm.

Forge provides access to an impressive list of latest-generation interfaces on the Jetson AGX Orin while adding additional interfaces of 3x USB 3.2, 2x GbE, Display Port, and a locking 6-pin Mini-Fit Jr. power input connector.

Rugged camera add-on expansion boards will also be available for use with Forge to interface directly with high-density MIPI CSI interfaces. Figure 1 shows a picture of the Forge carrier board and Table 1 shows its specifications. 

[[File:Connect Tech Rogue Orin.jpg|thumb| center | 600px | Figure 1: Top view of [https://connecttech.com/product/forge-carrier-for-nvidia-jetson-agx-orin/# Forge Carrier for NVIDIA® Jetson AGX Orin™]]] 


{| class="wikitable" style="margin: auto;"
|+ Table 1: Connect Tech's Forge Carrier Board Specification
|-
! Feature 
! Description
|-
| '''Networking'''
| <ul> <li> 2x 10GBASE-T (10G Ethernet)
       <li> 2x 1000BASE-T (1G Ethernet)
  </ul>
|-
| '''Camera Inputs'''
| 1x DisplayPort
|- 
| '''Display'''
| <ul> <li> 1x 16-Lane MIPI Expansion Connector 
       <li> Interface directly to a range of MIPI CSI, GMSL2 or FPD-Link III image sensors.

  </ul>
|- 
| '''USB'''
| 1x USB 3.2 Ports (Type-C – OTG Capable), 1x USB 3.2 Ports (Type-C)
|- 
| '''Storage'''
| 1 x Micro SD/UFS Card Slot, 2x NVMe M.2 Key M Slot
|-
| '''UART'''
| <ul> <li> 2x @ 3.3V levels UART1 and UART2
       <li> 2x RS-232/485 UARTs
  </ul>
|-
| '''I2C/SPI'''
| <ul> <li> 2x I2C Channel @ 3.3V IO
       <li> 2x SPI Channel @ 3.3V IO
  </ul>
|-
| '''GPIO''' 	
| 4x GPI, 4x GPO
|-
| '''User Expansion'''
| <ul> <li> 1x M.2 Key E 2230 Wifi/BT (PCIe/USB2)
       <li> 1x M.2 Key B 3042/3052 (LTE/5G – USB3) with
       <li> Micro SIM
  </ul>
|-
| '''Input Power'''
| +10 to 36V DC Wide Input Power
(6-pin Mini-fit Jr. Connector)
|-
|''' Buttons '''	
| Power, Reset, Recovery
(Tactile Buttons as well as fine pitch pin header connector)
|-
| '''RTC Battery'''	
|3-pin Picoblade connector to accept CTI battery cable assembly
|-
| '''PCB/Electronics Mechanical Information'''	
|Dimensions: 155mm x 125mm
|-
| '''Operating Temperature'''	
| -40°C to +85°C (-40°F to +185°F)
|-
|} 


You can get this board from the [https://connecttech.com/product/forge-carrier-for-nvidia-jetson-agx-orin/# Forge Product Page]

<noinclude>
{{NVIDIA Jetson Orin/Foot|Introduction/Carrier Boards/Nvidia developer kit|Introduction/Software Support}}
</noinclude>