Compiling Jetson TX1/TX2 source code: Difference between revisions

Compiling Jetson TX1/TX2 source code (view source)

653 bytes added , 29 April 2016

1,189

edits

@@ Line 392: / Line 392: @@
 cd $DEVDIR/TX1/Linux_for_Tegra_tx1/bootloader/
 cp nvtboot.bin nvtboot_cpu.bin u-boot-dtb.bin bpmp.bin warmboot.bin tos.img tegra210-jetson-tx1-p2597-2180-a01-devkit.dtb $DEVDIR/images/packages-backup/bootloader/
+cp $DEVDIR/TX1/Linux_for_Tegra_tx1/bootloader/t210ref/p2371-2180 $DEVDIR/images/packages-backup/bootloader/
 </pre>
@@ Line 421: / Line 422: @@
 Note: L4T U-Boot does not use the kernel partition. The kernel is installed into the filesystem alongside the boot configuration file in /boot. Aside from this difference, U-Boot has the same internal eMMC partition layout as that used by cboot.
+. Now, copy your u-boot binaries to the directory used by Jetpack to look for them. As you can see in the [http://developer.ridgerun.com/wiki/index.php?title=Compiling_Tegra_X1_source_code#DTB DTB] it will look for them in
+<pre>
+target_board="t210ref";
+BOOTLOADER="bootloader/${target_board}/p2371-2180/u-boot-dtb.bin";
+</pre>
+To copy the files run
+<pre>
+cp  $DEVDIR/images/bootloader/u-boot{,.bin,.dtb,-dtb.bin} $DEVDIR/TX1/Linux_for_Tegra_tx1/bootloader/t210ref/p2371-2180/
+</pre>
+. Now run jetpack and let it install the new binaries.
 If you are attached to the serial port while flashing you should see the [http://developer.ridgerun.com/wiki/index.php?title=Jetson_TX1_serial_port_output serial port output log while flashing]