JetsonTX2/GStreamer/nvgstcapture-1.0: Difference between revisions

JetsonTX2/GStreamer/nvgstcapture-1.0 (view source)

40 bytes added , 12 July 2019

352

edits

@@ Line 5: / Line 5: @@
 = nvgstcapture-1.0 =
-This is an application based on gstreamer and omx to capture, encode and save video to the filesystem. It has a lot of options. The source code is not released by NVIDIA yet but they are planning to release in future versions of Linux 4 Tegra (L4T), you can read about it at [https://devtalk.nvidia.com/default/topic/898129/jetson-tx1/enabling-camera-on-jetson-tx1-board/ Nvidia Embedded Computing Forum]
+This is an application based on GStreamer and OMX to capture, encode and save video to the filesystem, and exposes several application options. The source code is not released by NVIDIA yet but they are planning to release it in future versions of Linux 4 Tegra (L4T). For further reference, you can check the [https://devtalk.nvidia.com/default/topic/898129/jetson-tx1/enabling-camera-on-jetson-tx1-board/ Nvidia Embedded Computing Forum].
 <pre>
@@ Line 382: / Line 382: @@
 </pre>
-In general the application is consuming 15% of each of four cores. It is always displaying video this could affect.
+In general the application is consuming 15% of each of four cores. It is always displaying video, so this could affect.
 == Capture and record video ==