Compiling Jetson TX1/TX2 source code: Difference between revisions

Compiling Jetson TX1/TX2 source code (view source)

22 bytes added , 12 January 2018

m

1,638

edits

@@ Line 717: / Line 717: @@
 </pre>
-==== USB ====
+==== USB drive ====
-'''Important:''' Only for USB tegra needs a firmware that is loaded from the filesystem so the USB port is not enabled on uboot and then it causes problems to mount the fs from there, you can read about it [https://devtalk.nvidia.com/default/topic/933850/jetson-tx1/tx1-boot-from-usb/?offset=2#4871443 here].
+'''Important:''' Only for USB drive does tegra need firmware loaded from the filesystem so the USB port is not enabled in uboot and then it causes problems to mount the fs from there.  You can read about it [https://devtalk.nvidia.com/default/topic/933850/jetson-tx1/tx1-boot-from-usb/?offset=2#4871443 here].
-To flash the filesystem to USB you need to put the filesystem on the USB first
+To flash the filesystem to a USB drive you need to put the filesystem on the USB drive first.
 ) Insert your USB flash/drive in your PC and check where it was mounted