Intersil TW6869 Linux driver: Difference between revisions
m (→Enable driver) |
m (→Enable driver) |
||
Line 225: | Line 225: | ||
The driver was developed for kernel 3.10.67 using NVIDIA kernel source l4t-r23.2. | The driver was developed for kernel 3.10.67 using NVIDIA kernel source l4t-r23.2. | ||
'''1.''' Follow the instructions in [[Compiling_Jetson_TX1/TX2_source_code#Downloading_the_code Compiling Jetson_TX1/TX2 source code (Downloading the code)]] to get the kernel source code. | '''1.''' Follow the instructions in [[Compiling_Jetson_TX1/TX2_source_code#Downloading_the_code | Compiling Jetson_TX1/TX2 source code (Downloading the code)]] to get the kernel source code. | ||
'''2.''' Once you have the source code, apply the following two patches if you haven't yet, for fixing kernel errors during compilation. | '''2.''' Once you have the source code, apply the following two patches if you haven't yet, for fixing kernel errors during compilation. |
Revision as of 08:25, 7 May 2020
|
|
|
Intersil TW6869 features
Reference: Intersil TW6869 bridge chip
The Intersil TW6869 is a highly integrated solution that supports multi-channel video and audio capture via PCIe x1 interface for PC DVR system and video analytic application. It contains high quality eight channel NTSC/PAL/SECAM video decoders that convert analog composite video signal to digital component YCbCr data.
- Tested resolution: 720x480.
- Tested format: NTFS.
Enable driver
The driver was developed for kernel 3.10.67 using NVIDIA kernel source l4t-r23.2.
1. Follow the instructions in Compiling Jetson_TX1/TX2 source code (Downloading the code) to get the kernel source code.
2. Once you have the source code, apply the following two patches if you haven't yet, for fixing kernel errors during compilation.
kernel_r7_asm.patch
logical_comparison.patch
3. Apply the driver patches:
- PCI-Add-quirk-for-setting-valid-class-for-tw6869.patch
- fix-unknown-ioctl-V.patch
- add-tw6869-driver.patch
4. Follow the instructions in Compiling_Jetson_TX1/TX2_source_code (Build Kernel) for building the kernel, and then flash the image.
Make sure to enable TW6869 driver support
make menuconfig
Enable Analog TV support
-> Device Drivers -> Multimedia support (MEDIA_SUPPORT [=y]) ->Analog TV support (MEDIA_ANALOG_TV_SUPPORT [=y])
Enable TW6869 module
-> Device Drivers -> Multimedia support (MEDIA_SUPPORT [=y]) -> Media PCI Adapters (MEDIA_PCI_SUPPORT [=y]) -> TW6869 (VIDEO_TW6869 [=m])
Mount the kernel module
sudo modprobe videobuf2-dma-contig sudo modprobe tw6869
Examples
v4l2 utils
v4l2 utils V4L2 Test Application can be used for testing the driver, according to the input video resolution:
v4l2-ctl --device /dev/video0 --stream-mmap --stream-to=frame.raw --stream-count=1
Also Raw pixels can be used for visualizing the captured frame.
GStreamer
To capture a video use:
gst-launch-1.0 v4l2src ! xvimagesink
RidgeRun Resources | |||||
Contact Us
|