Spectrum Digital DM365 EVM

From RidgeRun Developer Connection

(Difference between revisions)
Jump to:navigation, search
Line 6: Line 6:
More information on the board can be found [http://www.spectrumdigital.com/product_info.php?products_id=232  here].
More information on the board can be found [http://www.spectrumdigital.com/product_info.php?products_id=232  here].
-
You can download the evaluation SDK for the EVM from [http://www.ridgerun.com/downloadcenter.shtml our download center].
+
You can download the evaluation SDK for the EVM from [https://www.ridgerun.com/index.php/download-center.html our download center].
-
To purchase a professional SDK, please [http://www.ridgerun.com/contactus.shtml contact us].
+
To purchase a professional SDK, please [https://www.ridgerun.com/index.php/contact-us.html contact us].
== Latest SDK Features ==
== Latest SDK Features ==
-
* Based on RidgeRun SDK 2011Q2.
+
* Based on RidgeRun SDK Turrialba.
* Linux Kernel 2.6.32.17
* Linux Kernel 2.6.32.17
* DVSDK 4.02.00.06
* DVSDK 4.02.00.06
Line 24: Line 24:
* Releases History:
* Releases History:
 +
**[[EVAL SDK Turrialba for DM365 EVM | EVAL SDK Turrialba - DM365 EVM]]
**[[EVAL SDK 2011Q2 for DM365 EVM | EVAL SDK 2011Q2 - DM365 EVM]]
**[[EVAL SDK 2011Q2 for DM365 EVM | EVAL SDK 2011Q2 - DM365 EVM]]

Revision as of 15:28, 6 February 2013

TI DM365 EVM board.


RidgeRun provides support for the SpectrumDigital DM365 Evaluation Board (EVM). This EVM is supported either with the Evaluation SDK or with the Professional SDK.

More information on the board can be found here.

You can download the evaluation SDK for the EVM from our download center.

To purchase a professional SDK, please contact us.

Contents

Latest SDK Features

SDK Releases

RidgeRun releases regularly SDKs for the TI platforms when new important features are added like a new kernel, bootloader or DVSDK is integrated. The following is the release history of the SDKs for the DM365 Leopard Board in their Evaluation version for non commercial use, also available in its Professional version.

Boot from SD Card

To boot EVM from SD card, you need to set SW4 to

Pos 3 = ON
Pos 2 = OFF
Pos 1 = ON

Articles related to this board

Navigation
Toolbox