SD card recovery LeopardBoard 365 serial output

From RidgeRun Developer Connection

(Difference between revisions)
Jump to:navigation, search
m (Created page with 'Example Leopardboard 365 serial console output during SD card board recovery process: <pre> SD card boot and flashing tool for DM355 and DM365 by Constantine Shulyupin http://ww...')
m
Line 31: Line 31:
sdcard_read sdc_src=0x004A7000 dst=0x82000000 len=0x00800000 dst + len=0x82800000 *data0=0x08088B1F  
sdcard_read sdc_src=0x004A7000 dst=0x82000000 len=0x00800000 dst + len=0x82800000 *data0=0x08088B1F  
nand_write dst_nand=0x00600000 block_idx=0x00000030 len=0x00800000
nand_write dst_nand=0x00600000 block_idx=0x00000030 len=0x00800000
-
<pre>
+
</pre>

Revision as of 21:53, 15 October 2010

Example Leopardboard 365 serial console output during SD card board recovery process:

SD card boot and flashing tool for DM355 and DM365
by Constantine Shulyupin http://www.LinuxDriver.co.il/
Online manual: http://wiki.davincidsp.com/index.php/SD_card_boot_and_flashing_tool_for_DM355_and_DM365
based on TI DM35x FlashAndBootUtils 1.10 SFT, TI flash_utils and SpectrumDigital evmdm355, evmdm365
Compiled on Oct 15 2010 at 08:25:58 with gcc 4.2.4
SYSTEM->DEVICE_ID=0x8B83E02F
&EMIFStart=0x02000000
nand->devID=0x000000DA nand->dataBytesPerPage=2048 nand->pagesPerBlock=64 nand->numBlocks=2048 nand_size=268435456
sdcard_init
sdcard_read sdc_src=0x00001000 dst=0x80001044 len=0x00000200 dst + len=0x80001244 *data0=0xA1ACED00 
flasher_data=0x000A7000   
sdcard_read sdc_src=0x000AF000 dst=0x80001044 len=0x00000200 dst + len=0x80001244 *data0=0x00010000 
check_pattern_123         
Erasing block 0x00000001 through 0x000007FB.
 Bad Block 0x00000749 Erasing is skipped 
sdcard_install
 * Flashing UBL
sdcard_read sdc_src=0x000B7000 dst=0x80001248 len=0x00007800 dst + len=0x80008A48 *data0=0xEE190F31 
Writing header data to Block 00000001, Offset 00020000
 * Flashing u-boot 
sdcard_read sdc_src=0x000C7000 dst=0x81080000 len=0x00028000 dst + len=0x810A8000 *data0=0xEA000012 
Assuming GNU UBL UBL_GNU_ENTRY=0x00000100
Writing header data to Block 00000019, Offset 00320000
 * Flashing kernel 
sdcard_read sdc_src=0x00107000 dst=0x80700000 len=0x00300000 dst + len=0x80A00000 *data0=0x56190527 
nand_write dst_nand=0x00400000 block_idx=0x00000020 len=0x00300000
 * Flashing Root FS         
sdcard_read sdc_src=0x004A7000 dst=0x82000000 len=0x00800000 dst + len=0x82800000 *data0=0x08088B1F 
nand_write dst_nand=0x00600000 block_idx=0x00000030 len=0x00800000
Navigation
Toolbox