Getting Started Guide for the AM35x EVM

From RidgeRun Developer Connection

(Difference between revisions)
Jump to:navigation, search
(Configuration of the SDK)
Line 128: Line 128:
== Installing the SDK on the target ==
== Installing the SDK on the target ==
-
 
+
$ make install
-
<pre>
+
-
$ make install
+
-
 
+
-
Board configuration: LogicPD AM35x EVM
+
   
   
-
   Installation system of uboot images over TFTP for host 10.251.101.7
+
Board configuration: LogicPD AM35x EVM
-
  Be sure u-boot is running on 10.251.101.125:3000 and no process (like termnet) is using it
+
    
-
  Press return to continue...
+
  Installation system of uboot images over TFTP for host 10.251.101.7
-
 
+
  Be sure u-boot is running on 10.251.101.125:3000 and no process (like termnet) is using it
-
</pre>
+
  Press return to continue...
-
</pre>
+
[[Category:AM35x]]

Revision as of 16:13, 18 March 2010

Contents

About this section

RidgeRun SDK for am35x EVM is a small footprint Linux support package that provides support for EVM evaluation board, and can be easily ported to custom hardware, while holding a minimal footprint and the functionality that you expect from a Linux distribution.

am35x-EVM SDK includes:

This section describes how to configure , compile, install and work with RidgeRun SDK Platform for AM35x platform running Linux.This SDK provides a fundamental software platform for development, deployment and execution on.

The instructions contain the information necessary to:

The document also provides detailed description of drivers and modules specific to this platform.

System requirements

Building and running all of the PSP components requires a Linux machine with ubuntu 9.04 or higher


Target Hardware Requirements

The EVM ships with other peripheral hardware like power supply, USB, Ethernet and serial cables. [1]

Linux host is required

Host Software Requirements:

To install the toolchain, follow the sequence. These are to be executed on the Linux host platform.[5]

Configuration of the SDK

The default configuration of the SDK is for booting from nand flash, unless stated otherwise on the release notes of the specific SDK.

>$ make config
  
  Ridgerun Linux SDK
  Board configuration: LogicPD AM35x EVM
 
  Processing toolchain...
  Processing kernel...
  Processing fs...
    Entering host-apps...
    Entering apps...
    Entering /home/ezuniga/devdirs/SITARA-ALPHA/toolchain...
    Entering arch...
    Entering mach...
    Entering proprietary_src...
    Entering myapps...
  Processing bootloader...
  Processing installer... 

Makeconfig.png


Configuration of telnet-serial adaptor

Installer Configuration  --->
     (XXX.XXX.XXX.XXX) IP address of telnet-serial adaptor 


    ┌────────────────── IP address of telnet-serial adaptor ──────────────────┐
    │  Please enter a string value. Use the <TAB> key to move from the input  │  
    │  field to the buttons below it.                                         │  
    │ ┌─────────────────────────────────────────────────────────────────────┐ │  
    │ │eg: 10.251.101.125                                                   │ │  
    │ └─────────────────────────────────────────────────────────────────────┘ │  
    │                                                                         │  
    ├─────────────────────────────────────────────────────────────────────────┤  
    │                         <  Ok  >      < Help >                          │  
    └─────────────────────────────────────────────────────────────────────────┘  
                                                                            

Configuration of U-boot IP address (DHCP)

Installer Configuration  --->
     U-boot IP address (DHCP)  ---> 


       ┌──────────────────────── U-boot IP address ─────────────────────────┐
       │  Use the arrow keys to navigate this window or press the hotkey of │  
       │  the item you wish to select followed by the <SPACE BAR>. Press    │  
       │  <?> for additional information about this option.                 │  
       │ ┌────────────────────────────────────────────────────────────────┐ │  
       │ │                     ( ) DHCP                                   │ │  
       │ │                     (X) Static IP address                      │ │  
       │ │                                                                │ │  
       │ │                                                                │ │  
       │ │                                                                │ │  
       │ │                                                                │ │  
       │ └────────────────────────────────────────────────────────────────┘ │  
       ├────────────────────────────────────────────────────────────────────┤  
       │                       <Select>      < Help >                       │  
       └────────────────────────────────────────────────────────────────────┘  
                                                                               

Installing the SDK on the target

$ make install

Board configuration: LogicPD AM35x EVM
 
  Installation system of uboot images over TFTP for host 10.251.101.7
  Be sure u-boot is running on 10.251.101.125:3000 and no process (like termnet) is using it
  Press return to continue...
Navigation
Toolbox